Search results

  1. A

    Sard FPR Wanted

    Wanted Sard FPR (Fuel Pressure Regulator) want a good fpr to run td04 around 1 bar. pref have the sard fpr in blue or red or something with maybe a sard gauge. let me know via pm or 07713570495
  2. A

    Inner cv joint

    Inner cv joint for my 99 ep91 needed asap. mot comin up
  3. A

    lsd wanted

    glanza just went through a td04, running around 210-220, needs lsd. any help would be great, will pay for delivery etc. trd, cusco, oem lsd etc. 07713570495
  4. A

    lsd (diff), injectors, splitters

    Used parts wanted. Oem lsd, trd lsd, cusco, quaife etc. Injectors to run td04, 330-360cc Front and rear splitters, both 96 and 99 Please txt me, as I'm rarely on this site at the min, for a quicker response, cheers, 07713570495 or g_adams2010@yahoo.co.uk
  5. A

    HKS EVC, Sard 550cc etc

    after some parts to finish my forge. td04l hybrid hks evc 6 front 99 optional splitter rear optional splitter 07713570495 for a quicker response
  6. A

    Link G4 or Apexi Power FC? Greddy Porfec b or HKS EVC 6?

    ok, getting the the engine put in, hopefuly in 2 and a half weeks. its going forged, away getting machining at the minute. hopefully want to run a around 280 hp, had a blitz dsbc spec r, didnt hold boost well, so i sold it plus an emanage ultimate because i heard a standalone would be better...
  7. A

    help me forge. wiseco 74.5mm, scat rods etc

    Trying to forge the glanza. I'm looking for low compression 74.5mm wiseco pistons, scat rods, with arp bolts pistons ring etc. Anyone know where to get these? Tm developments say they don't do them but just wossner, anyone lknow anywhere, with prices then email me on g_adams2010@yahoo.co.uk or...
  8. A

    TRD LSD Needed

    Wanting a TRD LSD to upgrade my current gearbox as im now running over 200 bhp on td04 pm, email or text me g_adams2010@yahoo.co.uk 07713570495
  9. A

    Where did this forged Glanza disappear to??

    Anyone seen this glanza? came from my area, but was sold on, havn't seen or heard of it since....
  10. A

    Blitz dsbc spec r set-up help needed

    Got a spec r blitz dsbc but didn't receive a set up manual. Was wondering if anyone had any helpful info of how to set this up right to run it at a bar with no messing about
  11. A

    Parts Wanted; Splitter, ecu, clutch, td04 mani and downpipe

    hows it going folks, got another wee project glanza coming in, anyone got a td04 manifold and downpipe? cheap as possible tbh front and rear 96 splitters, any colour preferred? side skirts glanza greddy emanage e-manage blue for a glanza with all necessary parts? also aftermarket...
  12. A

    WANTED! Glanza Bumpers, Racing Clutch ECU

    working on a mates car, who needs the following parts. a glanza front and rear bumper, any colour. an ecu, such as jam ecu, blitz access, emanage blue, emanage ultimate or a racing clutch, and make, model, and price. please leave me what u have and il get back to u
  13. A

    Size of Banjo Ends?? Help

    got a wepr td04 external wastegate kit from sacha there. just fitted the kit. but i need the size of the banjo ends to get the oil line fitted etc. Any help? i mailed sacha but yet to hear from him as of yet
  14. A

    lsd gearbox, clutch, indiglo dials, bucket seats

    wanted. lsd for a glanza. must be in mint condition. racing clutch for a glanza, exedy, orc etc. used or new. good condition recaro bucket seats, bride, or any make of bucket seat for my glanza. indiglo dials anyone?? in newcastlle at the min. pm's wont be replied to. txt me...
  15. A

    what lsd to get? lsd knowledge needed. rep to be given

    alright folks, finally got my td04 fitted. now i think i should consider an lsd. never considered this before, but a friend off this site has tried persuading me. What lsd gearbox should i look out for? whats the best gearbox i can get? i honestly havent a clue, i have heard of oem lsd, trd...
  16. A

    Blitz dsbc needed

    blitz dsbc boost controller. have my eyes on a few on ebay from japan. anyone on site with one? must have everything needed, and in mint condition
  17. A

    What BHP expected on rollers with TD04

    right folks, in the middle of fitting my td04 kit. got weprs new td04 kit, external wastegate, td04, evolution manifold, downpipe, screamer pipe. spec so far will be; aftermarket niridium plug leads, walbro fuel pump, td04l turbo, wepr mild steel manifold, s/s downpipe, with screamer...
  18. A

    my glanza progress. what to do next?

    bought a 1999 glanza v, after selling my 96. bought it standard apart from a set of tanabe coilovers in it. came with aftermarket plug leads, jam fcd, tanabe coilovers, 5zigen exhaust system, blitz air filter, blitz dump valve, cusco front strut. got at a bit of a bargin in...
  19. A

    Boost Controller Needed ASAP

    aint much money about me as i have just bought a brand new td04 kit. i have parts though, sparco strut brace, sevic car dvd player, glanza ct9 turbo, manifold, downpipe, 4 mini alloys, 2 honda alloys, top mount intercooler, and loads more. can maybe put cash towards it for the right boost...
  20. A

    EMU or Emanage Blue / an ecu for td04

    got a ep91. on the lookout for a good recommended ecu for a td04 running at around 1.2 bar at the very most. any ecu considered? willing to pay by paypal in a couple of installments over a few weeks to have the part paid off. must be ready to go straight in. pm
Top