SKINY
Lifer
So i was looking today to mount this, the alarm siren and power steering are in the way, even with the alarm siren moved there won't be enough room as it's a chunky regulator then need to run pipes too it.
Option 1 remove the power steering system and move the alarm siren, option 2 fit regulator on passenger side bulkhead just above and to the right of the filter, option 3 ?? Enlightenment please lol
Also, what fuel lines do I need to connect to the regulator ? I know 1 runs from it to the rail.
And very very important, when I have the new turbo kit, fpr,fcd and everything fitted what pressure should it be set to at idle ? I will have to drive to Jays about 17 mile for fuel runs to set it and don't want to be running rich/lean on the way there.
Also is it worth my while fitting st185 injectors I have here too ?
Option 1 remove the power steering system and move the alarm siren, option 2 fit regulator on passenger side bulkhead just above and to the right of the filter, option 3 ?? Enlightenment please lol
Also, what fuel lines do I need to connect to the regulator ? I know 1 runs from it to the rail.
And very very important, when I have the new turbo kit, fpr,fcd and everything fitted what pressure should it be set to at idle ? I will have to drive to Jays about 17 mile for fuel runs to set it and don't want to be running rich/lean on the way there.
Also is it worth my while fitting st185 injectors I have here too ?