extended wheel studs

[madman]

hi guys

i bought some extended wheel studs off egay and the do not fit as they are 29 spline and the ones on the car are 35 spline now my question is where will i get the correct ones from?

rep waiting

 

[akyakapotter]

what about here just done an google search this came up first http://www.priracing.com/section.php/93/1/studs-forged/abf424a2483b16e4d2d3104ac60bdb15

 

[glanzadude]

hello mate i got mine from this place in galway http://www.grp4fabrications.com/. They are 2.20 each I can get them for you tomorrow and post them up to yea

 

[cheshireglanza]

Fensports

 

[madman]

anyone else got any input for these

 

[Gryzor]

DP = SPLINE DIAMETER
L = TOTAL LENGTH
DF = THREAD TYPE

Common Wheel Studs:
DP DF L PART# Price Each
12 M12X1.5 70mm CRP/3 3.50
12 M12X1.25 70mm CRP/7 3.50
13 M12X1.5 70mm CRP/313 3.50
14 M12X1.5 70mm CRP/314 3.50
13 M12X1.5 82mm CRP313/82 3.95
14 M12X1.5 82mm CRP314/82 3.95
14.2 M12X1.25 65mm CRP/SUB 3.25
14.6 M12X1.5 74mm CRP/HY 3.60


are you sure the spline (diameter) is 35mm ?

 

[madman]

the spline count is 35 richey the last ones i got were 29 and i wasnt going forcing them in...

 

[Gryzor]

the spline count is 35 richey the last ones i got were 29 and i wasnt going forcing them in...

John, I can't find any were measuring wheel studs by spline count.

 

[madman]

Yeah they are hard come by i think i may of found a UK company that does them im just waiting on a reply. thanks for your input richey

 

[Jay]

Celica ones are ideal, Phil used some to fit his ST185 brakes ages ago.

Still available from Toyota if you are stuck.

Jay

 

[madman]

Celica ones are ideal, Phil used some to fit his ST185 brakes ages ago.

Still available from Toyota if you are stuck.

Jay

now jay that's a great idea... any chance you have the part number?

 

[Jay]

Oh, now you're asking lol..

I'll see what I can dig up amigo.

 

[WallaceGlanza]

I got mine from this seller on ebay - http://www.ebay.co.uk/itm/Toyota-Wh...arts_Vehicles_CarParts_SM&hash=item415654fd8d

Fitted fine.

 

[Gryzor]

so Spline diameter - 14.2mm ?

 

[madman]

Oh, now you're asking lol..

I'll see what I can dig up amigo.

a bit of a challenge be good for ya

I got mine from this seller on ebay - http://www.ebay.co.uk/itm/Toyota-Wh...arts_Vehicles_CarParts_SM&hash=item415654fd8d

Fitted fine.

good stuff wallace i may give them a shot and see

 

[WallaceGlanza]

Ya, they needed to be pulled through with an impact gun but as I say fitted fine. The spline count doesn't really matter as they do almost re-spline the actual hub plate when they pull through - you do want them to be a very tight fit after all.

 

[madman]

Ya, they needed to be pulled through with an impact gun but as I say fitted fine. The spline count doesn't really matter as they do almost re-spline the actual hub plate when they pull through - you do want them to be a very tight fit after all.

i got ones already but the were a tight fit as you say but they were the wrong spline count and didnt want to damage the hub but i see where your coming from just incase i need to remove them id like them to be 100% correct.

 

[WallaceGlanza]

I don't think the ones I got had the same count either tbh - so don't buy them if that's what you really want!

 

[madman]

I don't think the ones I got had the same count either tbh - so don't buy them if that's what you really want!

no problemo i will keep that in mind