I live in the USA and these parts are impossible to find here because Toyota didn't see fit to sell the Starlet/Paseo/Tercel with factory rear disc brakes. Needless to say those parts are in high demand here among those who modify their Tercels and Paseos!
What I'm looking for:
2x Rear backing plates
8x Rear backing plate bolts
2x Rear caliper brackets
2x Rubber line from caliper to backing plate
2x Hard line from backing plate to axle
2x Hand brake cables
2x Rotors
2x Calipers
1x Proportioner valve
Also since we can't even buy new parts in the states, I would like to be able to get 2x new rotors and two sets of pads. And a rebuild kit for the calipers would be nice too, perhaps even necessary. Wheel bearings and inner seals aren't necessary, luckily those are interchangeable with the same parts for the drums. It might be a good idea to pull one of these jobs:
...and just cut the whole assembly off the axle with a torch. One more thing, I believe the EP91 is more compatible with my vehicle's hand brake cables, but I know for a fact that EP82's will work with minor modifications, so either's good.
Feel free to reply or PM with an offer in pounds/USD for what's listed above, without consideration to shipping cost. I know it will cost a lot to ship anything weighing around 15-20Kg, which is what I figure this will all come out to. I'm giving plenty of consideration to the time and trouble it would take to collect all this stuff, so even if you feel your price would be too high, make an offer anyway! There are many in the states looking for a "kit" so perhaps you could start something.
What I'm looking for:
2x Rear backing plates
8x Rear backing plate bolts
2x Rear caliper brackets
2x Rubber line from caliper to backing plate
2x Hard line from backing plate to axle
2x Hand brake cables
2x Rotors
2x Calipers
1x Proportioner valve
Also since we can't even buy new parts in the states, I would like to be able to get 2x new rotors and two sets of pads. And a rebuild kit for the calipers would be nice too, perhaps even necessary. Wheel bearings and inner seals aren't necessary, luckily those are interchangeable with the same parts for the drums. It might be a good idea to pull one of these jobs:
...and just cut the whole assembly off the axle with a torch. One more thing, I believe the EP91 is more compatible with my vehicle's hand brake cables, but I know for a fact that EP82's will work with minor modifications, so either's good.
Feel free to reply or PM with an offer in pounds/USD for what's listed above, without consideration to shipping cost. I know it will cost a lot to ship anything weighing around 15-20Kg, which is what I figure this will all come out to. I'm giving plenty of consideration to the time and trouble it would take to collect all this stuff, so even if you feel your price would be too high, make an offer anyway! There are many in the states looking for a "kit" so perhaps you could start something.