wheel bearing

[krissyd]

hi, does any1 know how to replace front wheel bearing and does it need to be pressed out?

 

[sx_turbo]

needs to be pressed in and out mate.

u need to remove hub, then press bearing out

 

[WallaceGlanza]

Whilst we're on the subject how do you do the rear one's?

 

[krissyd]

cheers bud, that's all i needed to know.

 

[danturbo4311]

rear ones are easy to do you remove the usual stuff like disc calliper etc. then they should just come out, you'll need to fit new braces/runners (using a hammer & punch or flat screw driver to the old ones out) you will get them with the kit along with a new seal & some grease, but you dont need a press for the rears

 

[VXR230BHP]

I just removed my rear discs how do i remove the seal for the inner bearing?

 

[Gryzor]

I just removed my rear discs how do i remove the seal for the inner bearing?

http://www.tercelreference.com/articles/rear_brake_conversion/rear_brake_conversion.html

 

[danturbo4311]

normally just lever it out with a flat head screw driver main thing you gotta be carefull with is tapping in the new bearing braces/runners, its not hard just take your time as you dont want to damage them, use the old ones as a template to knock the new ones in position