Search results

I almost always Used ARIAS pistion an all the builds and never had any problems and are not loud nose almost as std engine..

shell if you are talking about valve oping timing you cant do it.. we don't have on 4e.. you just can mod the spark timing..

I f you don't like the noisy of the pistons go for the AIRIS they are the most min one we find ..:rockon: as kon or kieth for them..

how much he's look for ? or will sell just the turbo?

Send a pm to Kieth at ZIZCO he will help you if you need a dog box..

Hi turboloon . about the runners not always the bigger is the better . and it depends on type of engine you have .. we are still running the same type of manifolds that buy on all most all cars an are running in low 11sec ... but if you want it bigger runners tell zisco and he will do it for you..

hi Alfredo ... we are not using any more the cruise springs when doing heads whit cams because they are not good.. they don't take lift and it will bind at full lift... if you cut under spring and use the cruise springs you will work with the lift but the bass presser will be low... you need...

we never have flow bench any of our heads and all ways had good gain... you need to know how much and were to remove...practice make's it perfect ;)

send it to us and we will find how to solve the problem you have:)

Hi mate if you want u can put the ct12 it's from the old 1500cc engine it's much better

Hi Mate. you can do an iner shim between the valve and the buckit but if you are going to hi revs not a good idea. if you what at zizco we have big valves and thay are longer for rigrinds cams. we allways use this valves on the full race heads.

Hi mate. At Zisco thay do heads or if you want you can have valves ready for you no machine just a good inginer .... Thanks

we have a kia pride power by toyota 1.5 turbo diesel engine and its runing almost 12.1-12.3 et.

Well done spuddy...

Hi mate. yes thay don't click as the toyota ones do, but you just need to press them a bit whit a socket by your hand and thats it you don't need u press them hard. we never had any problems and we always use them and we have almost sold more than 30 sets whit no problems... Thay are the best...

Whit kons car we are using M/H 23/13/8 rims are exsospeed ... chris

Here all the big power starlets have the billet main caps ( kon no lool)... i have break them 2 times but now no problems whit the billet ones ..

Hi.. do you have any idea of the price ? THANKS

Hi is the cam timing good? the 2 marks on the cams pulys?

HI mate Yes you can why not?.. You just need to noc a bit the block whit the scat rods but thay are good. pekitu garage