Search results

Has anboday got any shock absorbers for an ep82 additional info my car is L reg dont know if older shockers would fit it ALSO could do with shockers with springs dont mind but without spings thanks if you could PM me would be GREAT!

wanted to know will a normal shockabsorbers off the non tubo model 4efe fit my ep82 (turbo) they r the exact same model of cars so im assuming tey would be right? additional info the ep82 is a L reg 1993 currently lowered on 35mm springs will want to lower with new shockabsorbers (all4 lol)

wanted to ask a very basic question: when im adding in coolant into my car what should the mixture be? 50 50 or 70 water 30 coolant ect.... could anybody guide me pls thanks! also where do i apply the coolant to, in the radiator or the coolant bottle (obviously after draining and flushing the...

Just tried starting my car after a month changed battery ect jst changed a fuse recently too so electrics are fine battery is fine just got a new one put in put fiver worth of petrol in the ep82 yet when I turn the key the car tries to start it makes the gurgle noise as though its about to strt...

Just tried starting my car after a month changed battery ect jst changed a fuse recently too so electrics are fine battery is fine just got a new one put in put fiver worth of petrol in the ep82 yet when I turn the key the car tries to start it makes the gurgle noise as though its about to strt...

right ppl,basically my car has been pRked up for about a month nearly due to insurance,my alternator belt was just replaced30min ago because it broke, anyway we tried charging the battery my mates accidently put the negative on the positive and then positive on the negative once(jump leads were...

thanks mate will check how much is will it cost to get it fixed if its the alt or p/s rep given y da wy thnaks

started my carup in the morning so the engine dont get siezed because its been snowing here, anyway started the car up then once the car was warm i reved it alittle bit then the car kept going to 2 thousand revs then fropin to abou 1 and three quarter thousand revs then jumpin back to two then...

got a problem, here in manchester its been freezin its ben minus 2 for the past two days and my cars been parked up for the past 3 days and just now about 10/20 mins ago ive started the car up and it started then i decided to rev it a min later and when i let go the car stayed at 2 and a half...

Lol y think my mates eggin me on lol YH ITS DA 'POVERTY ONE' is not got electric windwns anted to know if its got lsd

hi wanted to ask if a staet turbo rs model ep82 with the glowing gt light at the back have a lsd gearbox standard? thanks respect will be given

rip sad news deepest sympathy for friendz and family

im going to get te following modifications installed wanted to know how much bhp wil the car be running on, induction kit (off ebay 40 pound) decat downpipe with unprated gasket stainless steel manifold airflow pipe staight to the airfilter frontmount intercooler hkd actuator ht ignition...

hello peoplez! i have an ep82 everytime i try to start the car it doesnt start so i have to charge battery or jump start it after being charged. anyway when the batterys been charged and iv been driving in it eg 20/30 mins and im stationary if i let go of the accelerator the car just cuts off...

hello peoplez! engine cutting off even when battery been charged when stationary? if i let go of accelerator the engine cuts off got fuel in the car battery does get charged before driving (well as soon as it cuts off the battery has to get charged anyway) can anybody tell me what the problem...

nice 1 lads i heard that you need to paint it with hightemp paint, obvously not tanks lads

nice 1 lads will defo turn he boost down! will it b ok to put it back to 1 bar after the fpr and fcd?

im pretty sure its stock ecu, never checked to b honest, would you reccomend uprated injectors?

no the light aint on? what is it, i plan on getting a rse and rate fpr and a 255lph fuel pump can i run at 1 bar if i get these? do i need a fuel cut defender?

got a stainless steel manifold (with uprated gasket from fen sport), hks actuator, frontmount intercooler, decat downpipe (with uprated gasket from fen sport), induction kit in my ep 82 running the car on about 13 psi / 14psi (1 bar) but whats happening now is that as soon as i put my foot down...