5 Stud .. PCD 100

Killamats

Registered Trader <a href="http://www.toyotagtturb
A few months ago I bought a set of bronze TE37 alloys, in mint condition from Japland.. by mistake though I didn't realise they were 5 stud, so unfortunately they are no use to Starlet owners.
Now that I have them in my hands, I realise they have a PCD 100, which apparently is quite uncommon and I cannot find a car around on which they will fit! Not that I tried many, but I was told they do not fit on most Japanese cars. The most common are:

-4 x PCD100
-5 x PCD114.3

Some Hondas use 4 x PCD114.3, the older type apparently.

Could anyone shed some light on which car these wheels might fit?? I really need them gone, they're taking up space in my garage and I'm sure someone would love them they're in absolutely brilliant condition not even a simple scratch!!

thanks for any input, rep will be added!:)

here's a pic:

te37sbronze1.jpg
 

faisalgtturbo

Member +
subaru is defo 5x100 (classic ones + upto 2003/2005)
new ones like hawk eye changed to 114 pcd i think


and i think

also celica gt4/maybe mr2's

faisal
 

Killamats

Registered Trader <a href="http://www.toyotagtturb
you've been a great help guys, I have found sufficient info in the material provided above to support each claim.. so yoeh the likes of imprezas before '03, Audi TT, S3, S2 etc, and the VW too..

THANKS a lot!:beer::beer:
 

azerty

Supermoderator
yep yep yep. subaru. which offset are they ?
if they are offset 48 then they are deffinetly meant to go on a GC8 (classic shape)
celica st185 also use pcd 5*100
 

Killamats

Registered Trader <a href="http://www.toyotagtturb
yep yep yep. subaru. which offset are they ?
if they are offset 48 then they are deffinetly meant to go on a GC8 (classic shape)
celica st185 also use pcd 5*100

they're offet 42 i believe mate, which is the st185?
 

azerty

Supermoderator
then they won't fit GC8 impreza (classic shape) but they will fit bugeye impreza (gdb)

celica st185 is this beauty :)

st18502.jpg


I think other celica's do aswell. and other toyota has to share this PCD
 
Last edited:

Keri-WMS

Member +
All the Gen 5 and 6 Celicas are 5x100 as far as I know, other than the Gen 6 ST205 which is the bigger Supra style 5x112.xxx

So that's the:

- (maybe 4th gen? ST160, ST162, ST165)
- 5th Gen AT180, ST182, ST183, ST184, ST185 which are all a 54mm bore AFAIK.
- 6th Gen AT200, ST202, ST203, ST204 which are all a 55mm bore AFAIK (but not ST205).

99% sure that's right, hope it helps!
 
Top