TheStarletGT
Member +
I have a Microtech LTS8 ecu, running to my knowledge standard injectors. Now if i want to run 7MGTE or 3SGTE injectors, can it be a direct swap, and my ecu will work perfectly, or is there a risk.
RE: Low/High impedance injectors etc. Would i need a resistor for each injector.
Are the two types of injectors above low or high impedance injectors.
RE: Low/High impedance injectors etc. Would i need a resistor for each injector.
Are the two types of injectors above low or high impedance injectors.