B18c Civic

[GTwayne]

For sale: B18c Civic vti 1993 (uk)

Item Condition: Good but as a few rusty areas, have pics if needed.

Price and price conditions: £2500 or £3000 with parts that I haven't got around to putting on.

Extra Info: Car as recently had an oil and filter change, two new front tyres and will have 6 months tax from 30/9/09. MOT march 2010.

Engine Block

B18C4 block (100% completely stripped)
NPR race pistons 35% stronger then oem ones (B16b design 0.50 oversized)
Pistons electro coated in dry lubricant coating
NPR total seal race series piston rings
ITR oem rods
ARP drag series rod bolts
ARP race series main bolts
Micro polished crank
Full bottom end pro seal kit
Tetra coated racing rod bearings
Tetra coated racing main bearings
Heavy duty thrust washers
Block honed
Block bored
Block decked
Block guard/sleeve saver installed
All threads cleaned and chased
All oil galleries shot through and cleaned
Block hot tanked
Rods and pistons balanced
Block blue printed
Piston ring end gaps set
Outer block painted black

Engine Head

P72 cylinder head from the usa spec integra gsr
Skunk2 pro series valve springs
Skunk2 pro series titanium retainers
Skunk2 pro series cam gears
Skunk2 pro series stage 3 cams
370 injectors
MLS head gasket
Full race single piece forged steel valves (flat faced to match pistons)
Valves hand lapped and seated
Verton valve stem seals
Skunk style intake manifold with larger inlets to match P72 cylinder head
Head chamber balanced and ccd
Head chamber polished to remove detonation causing material
Head pressure tested
Head machined to remove all protruding surfaces that can heat up

Engine Other

EK9 type r oil pump
B series water pump
lightweight pulleys (all three)
New honda belts all round
AEM short ram induction kit
Baffled sump (spoon style baffles)
21 row oil cooler with braided lines
Remote oil filter
Fluidyne alloy radiator
Blue coolant hoses
JDM 4-2-1 manifold (integra 98 spec import type r)
Ronin stainless systems custom 2.5 inch exhaust
Walbro uprated fuel pump 180 lph
Integra driveshafts
Innovative 75a billet engine mounts
Displacement 1820cc
Compression ratio 12.6-1

Drivetrain

LSD integra gearbox (rebuilt with new syncros)
Exedy racing stage 1 clutch with 4.16kg flywheel

Engine management

JDM P30 ecu chipped with full data logging and crome software

Bodywork/Handling

JDM amber indicators
New style headlights (post 93 spec with screw adjustments)
Integra si alloy wheels (black 15x6)
Locking wheel nuts
Toyo proxes T1-R 195/50/15
Spoon style front splitter
Carbon fiber roof spoiler
Carbon fiber bonnet
Aerocatch (plus flush locking bonnet pins)
Tinted light covers (front and rear)
Integra design D2 coilovers
Jap spec rear lower arms from JDM SIR2 (same as integra type r)
Skunk2 front camber adjusters
Rear camber adjusters
Whiteline castor kit
Powerflex poly bushes on front suspension
Rear upper strut brace
Rear lower brace bar
Front strut brace
Honda prelude front disc conversion (calipers)
282mm rover MG discs
EBC red stuff pads

Interior

Oil pressure gauge
Oil temperture gauge
Momo steering wheel
Mugen pedals
Drivers 4 point harness
4 door vti front seats

Pictures:

Contact Details: PM

Location: Devon

Delivery & Conditions of Delivery: Pick up only.

 

[popsy09]

nice spec list !! what bhp is she putting out ??

 

[ian]

Any more pics ?

 

[Shib786]

pretty interested, as above what bhp is it pulling, and any other pics of outside and interior?

any rust spots like the usuals?

 

[AdDaMan]

what ya after next mate?

 

[dantheman]

nice little engine spec matey, gotta be pushing over 210bhp id have thought.

 

[GTwayne]

pretty interested, as above what bhp is it pulling, and any other pics of outside and interior?

any rust spots like the usuals?

Some pics of it when I first got in the members garage, I'll get some more of the interior/exterior. Got pics of the rusty parts, I'll get them up as soon as I can.

 

[GTwayne]

what ya after next mate?

Thinking I might go Evo V, always liked the shape of them.

 

[addz]

More pictures might possibly help with sale.

 

[GT_Irl]

More pictures might possibly help with sale.

x2!

 

[GTwayne]

Give me a chance guy's, I've said I'll get some more put up.

 

[GT_Irl]

Give me a chance guy's, I've said I'll get some more put up.

Just some helpful advice mate. I reckon she'l sell in no time anyway! Best of luck!

 

[starlet sr]

would u swap for a glanza mate

 

[Dan3SGTE]

would u swap for a glanza mate

he said he wants an EVO, i kind of doubt he would swap with a starlet otherwise he would have said in the advert.

 

[richglanzav]

power?

 

[Dan3SGTE]

power?

Looking at the mods i would say in the region of a genuine 210-225bhp.

Which is alot on this engine, and would be very very quick.

 

[www.glanza.co.uk]

She shifts alright, I took her out for a spin not long after Wayne bought her. Handling's bloody good too!

 

[richglanzav]

gta say it does look rather a good bargain for whats on it. just wna see a few more pics of all around/inside the car, and cud well be interested in this. after sumthin quick but cheap so this fits the bill.

cud ya also let me know the mileage on the chassis and the rebuilt engine wayne when ya get time mate, thanks.

 

[GTwayne]

I'm not one for taking pics (as you can tell), but here's some more. One shows the wing I got from the honda forum (1 of 3 that I bought) It's not great but was better then the other two and not rusty.

Anything you want pics of specifically let me know and I'll do my best.

 

[wee-jo]

Whats the mileage on this? Also is the driverside wing a different colour to the rest of te car? Looks like it in the 2nd pic or am I imagining things haha.