HairyPoppins
Member +
Looking to bypass the solenoid to remove 1st and 2nd boost restriction. I’ve seen pics online as to what needs to be done but the images aren’t great (fuzzy). Anyone have steps or info I could follow please. Cheers
Boost Restriction Removal
- Thread starter HairyPoppins
- Start date
SKINY
Lifer
Are you planning on a boost controller ?
My whole solenoid system was removed before I got it, pipework the lot so can't really help there lol
On the Gt-four/ Caldina you block the pipe on the block leading to the actuator, do the same from the actuator to the block so you have it blocked both ways, the other pipe from the actuator to the compressor house is where you put the boost controller solenoid.
I'd say the GT setup is very similar
My whole solenoid system was removed before I got it, pipework the lot so can't really help there lol
On the Gt-four/ Caldina you block the pipe on the block leading to the actuator, do the same from the actuator to the block so you have it blocked both ways, the other pipe from the actuator to the compressor house is where you put the boost controller solenoid.
I'd say the GT setup is very similar
