Breaking EP82 (lost of mods)
- Thread starter Jeffers_21
- Start date
FerryScoob
Member +
Do you have a CT9 turbo?
Jeffers_21
Member +
i do have a ct9. however the oil seals have gone in it, and if i rember it's got a small crack in the wastegate. it is either my orgi ct9 or my hybrid one that had the crack cant rember. and before anyone ask's the hybrid has been sold. anyway it needs to go so if you want it, you can have it for £15. im never gonna need it again.
FerryScoob
Member +
Its OK mate. I have 2 ill ct9's
luke_gt_ep82
Member +
dont surpose you got a short shifter and lower arm bar???
starlet-gam
Fresh Recruit
clear some space in your inbox.. you cant recieve anymore PM's
thomllee1981
Member +
ggrrrrrrrrrrrrrrrrr get off its mine!
lol playing already called dibs and am waiting for delivery cost so i can pay up!
Jeffers_21
Member +
could people please email me as im finding the PM inbox is getting to full. email me at Jeffers_21@hotmail.com cheers
luke_gt_ep82 the shortshift and lowerarm bar has been sold now sorry mate
spuddy, i do have the window mech make me an off and we shall see
si-w pic's are coming today, i left my memory card over at the rents, but ill put them up as soon as i head back over. but it has been put aside for now as someon else wants it. i shall keep ya updated tho.
luke_gt_ep82 the shortshift and lowerarm bar has been sold now sorry mate
spuddy, i do have the window mech make me an off and we shall see
si-w pic's are coming today, i left my memory card over at the rents, but ill put them up as soon as i head back over. but it has been put aside for now as someon else wants it. i shall keep ya updated tho.
gttuning-glenn
Member +
dibs on emanage, email sent
Jeffers_21
Member +
sorry guy's the emanage has sold to the 1st person on the list. there was quiet a few of you interested but had to let the 1st person have it
chinaone
Member +
Hehe, thanks Josh.
Jeffers_21
Member +
np mate glad i could help out
thomllee1981
Member +
derek nice to see you picking up a good deal like me mate!
is fitting the fuel pump easy?
is fitting the fuel pump easy?
Jeffers_21
Member +
yeh, all you need to do is take out the rear seat, in hte middle is a little hatch type thing, there is a few pipes going to it with the middle one bolted, those bolts can be a pain in the arse one's that all undone, undo the screws around it and lift out, this is the cradle thing, then just plug the cradle that im sending to ya and away you go whoop lol
im getting the antilift kit of in a sec, then ill box it and weigh it and get a quote for shipping. sorry to keep you waiting lleey2k4
im getting the antilift kit of in a sec, then ill box it and weigh it and get a quote for shipping. sorry to keep you waiting lleey2k4
Jeffers_21
Member +
ok here are pictures of the bit's.
the rad holds presure fine but as you can see it is a little mashed where i had to force it in a bit with the turbo. once it was in there, there was about a 5mm gap between the turbo and the rad but its a pain to get it in. looking at in now ive got it off, ill take £80 for it. you could prob bend some of the fins back and stuff but its up to you.
the rad holds presure fine but as you can see it is a little mashed where i had to force it in a bit with the turbo. once it was in there, there was about a 5mm gap between the turbo and the rad but its a pain to get it in. looking at in now ive got it off, ill take £80 for it. you could prob bend some of the fins back and stuff but its up to you.
Jeffers_21
Member +
This is for the guy that wanted the seats and seatbelts etc
they are in very good condition but could do with a quick hover and clean, no cig burns or anything. comes with the joining bracket and screw's, the seatbelts i havent got off yet but ill take pic's when i do. same condition as the seats.
they are in very good condition but could do with a quick hover and clean, no cig burns or anything. comes with the joining bracket and screw's, the seatbelts i havent got off yet but ill take pic's when i do. same condition as the seats.