**Buddy Club Spec 2 Exhaust System** £390 Delivered GLANZA NOW IN STOCK!!

MikeGlanzaV

MikeGlanzaV

Trader
milloman said:
Oh man!!! :D can't WAIT! Guessing you've also got decat and manifold to go with? Are u running TD04? :D (just trying to gauge how mine will be if at all different!)
Click to expand...

Yes it has one of Toby mild steel manis and a ZEP downpipe, running Toby's Hybrid CT9 at 1.2bar.

Much throatier and deeper than the HKS it replaced!!

Just so you know I had to bend the rear hanger a little bit to stop it banging on the boot floor. Dead easy to do and it may not apply to your cars but if you hear a banging thats what you need to do. 2 mins with a pair of mole grips!!

Mike
 
Last edited:
milloman

milloman

Member +
MikeGlanzaV said:
Yes it has one of Toby mild steel manis and a ZEP downpipe, running Toby's Hybrid CT9 at 1.2bar.

Much throatier and deeper than the HKS it replaced!!

Just so you know I had to bend the rear hanger a little bit to stop it banging on the boot floor. Dead easy to do and it may not apply to your cars but if you hear a banging thats what you need to do. 2 mins with a pair of mole grips!!

Mike
Click to expand...

Thanks for the heads up on that i'll let the garage know, won't be an issue at all, these things will never go in 100% first time :)

Good stuff, fairly similar setup to me, but i'm running a TD04 at a loowwwwer boost of 0.8... for now of course ;-)

Cheers!! :)
 
J

Jules-B

Member +
Ah, i thought i would be rare with my buddyclub exhaust!!
These are seriously good systems,and sound wicked.

What did you guys do with the downpipe to exhaust gasket??
 
milloman

milloman

Member +
Bugger :( i've got a WEPR downpipe which it's end is exactly flush at 180degree so its completely vertical... the BC spec II here is more like about 30 degree :( any idea how or wat the hell i need to do to get it fitted? Guessin i'll have to get someone to bend the bitch into position. Is all of yours joint slightly at an angle? (exhaust to downpipe)
 
T

Toby@ToyTuning.com

Banned - DO NOT BUY FROM TOYTUNING
You will need to chop of the original flange from the downppie, they are made for the stock cat or a decat which sits in the stock positon. The WEPR downpipes are designed for there own systems and don't sit in the stock position upon exit..

Any good exhaust fabricator can sort this for you, they will chop the old flange and re-weld one that sit's perferctly just needs a little time :)

T
 
MikeGlanzaV

MikeGlanzaV

Trader
Damn mate - Ive seen this before with a WEPR centre section. As Toby says an exhaust fabricator will be able to modify it to fit for you. Will be worth it in the end though mate, they sound awesome.

Mike
 
milloman

milloman

Member +
Yeah its a bummer! but i'm not gonna do anything yet... i *think* my turbo might be on its way out :( so i'll get that checked out then see what to do because it might mean a new downpipe anyway! :)
 
You must log in or register to reply here.
Top