Blak_Mamber
Member +
Very nice pal, good choice. Love the wheels, im a BBS fan. Enjoy 
I went Honda :O
- Thread starter sanchez
- Start date
starletgtturbo1
Member +
i want one of these too, there awsome
Starlet_Sam
Moderator, Regional Area Reps Supervisor & Gay Car
supercharger ftw!!!! i drove a cooper s (womans Car i know
Superchargers ftl, even Cooper S' don't use them now!
Iain@CRD
Lifer
:haha: Geek!
Starlet_Sam
Moderator, Regional Area Reps Supervisor & Gay Car
Haha I work at the Mini factory, of course I'm going to know that!
sanchez
Member +
Buy Derek's white set
Nah not my cup of tea lol
Nice car mate. Love the sound of these.
http://www.youtube.com/watch?v=-_DtiopxETQ&NR=1
14 seconds in
Cheers mate, sounds awesome!!!
Cheers dude, yea i always liked them too so got one
Very nice pal, good choice. Love the wheels, im a BBS fan. Enjoy
Cheers Lewis, yeah they are nice but not for me, so on ebay they will go
Yeah do it mate!
Lol ive felt turbo mate, now fancy a SC, easy enough to sell it up and go turbo so no bother
sanchez
Member +
Just been down to see my mate at my local Honda tuning place to discuss a few options
Skunk2 exhaust system will be in the UK start of June so think i will have one of them £600
While im at it i think i will take a Skunk2 gearknob too
We discussed intakes, and have decided on the AEM cold air intake -£250
Think my clutch has started slipping so we taked new clutch and flywheels, Competition clutch and light weight flywheel sorted - £500
My mate who works at the local motor factors has priced me up some EBC grooved and dimpled discs front and rear along with yellow stuff pads - £350 (normally £450, the joys) will probably add some braided lines to that also.
Meister Rs coilover pretty much confirmed, just need to pay lol - £600
Which just leaves a manifold for now, maybe a buddy club one, and wheels, still undecided on them yet....
Oh and a front lip of some sort.
So as you can see, i have only owned the car 2 weeks, and the mod bug has hit me already.... haha
That will do for now untill i decide weather im going to got ITB or Supercharger
Oh and i got a small number plate made up for the front!
Skunk2 exhaust system will be in the UK start of June so think i will have one of them
£600While im at it i think i will take a Skunk2 gearknob too
We discussed intakes, and have decided on the AEM cold air intake -£250
Think my clutch has started slipping so we taked new clutch and flywheels, Competition clutch and light weight flywheel sorted - £500
My mate who works at the local motor factors has priced me up some EBC grooved and dimpled discs front and rear along with yellow stuff pads - £350 (normally £450, the joys
) will probably add some braided lines to that also.Meister Rs coilover pretty much confirmed, just need to pay lol - £600
Which just leaves a manifold for now, maybe a buddy club one, and wheels, still undecided on them yet....
Oh and a front lip of some sort.
So as you can see, i have only owned the car 2 weeks, and the mod bug has hit me already.... haha
That will do for now untill i decide weather im going to got ITB or Supercharger
Oh and i got a small number plate made up for the front!
sanchez
Member +
Well small update, going to pick up a OEM hardtop tomorrow from London, its currently OEM silverstone grey, but it comes with the fitting kit and a decent price tag, so im happy untill i get it sprayed the Grand Prix White to match the car...
..So in that case, whatever wheels i go for will probably go white too
Which im hoping to get a set of OEM Honda NSX wheels, so the car is going to look clean and OEM which will look pretty cool i think!!!
Oh and how i LOVE ebay, just picked up a 2nd hand TODA clutch/flywheel kit similar to the ORC309 i had on the GT with a few thousand miles on, so that should cope with whatever power upgrades i go for in the future.
Pics tomorrow
..So in that case, whatever wheels i go for will probably go white too
Which im hoping to get a set of OEM Honda NSX wheels, so the car is going to look clean and OEM which will look pretty cool i think!!!
Oh and how i LOVE ebay, just picked up a 2nd hand TODA clutch/flywheel kit similar to the ORC309 i had on the GT with a few thousand miles on, so that should cope with whatever power upgrades i go for in the future.
Pics tomorrow
sanchez
Member +
Yeah i think i have seen that one for sale on PHs, looks good!
Well the car is going from this:
(test fitted)
And both will be coming back GPW in a week or so :thumbup:
Next dilemma is do i get an OEM spoiler for the boot or not??
And im going to source some AP2 side spats also i think, and the black exhaust surround on the AP1, im also going to get that done in GPW, although i may go for a UK spec part as it has the the fog light fitted unlike the JDM version.
Also picked this up the other day from a fellow member of this site.
Should do well. And at the same time as i get that fitted, i will be getting a Toda TCT fitted, valve clearances checked, oil filter change, so should be sounding and running sweet by this point
Then next on the agenda is exhaust manifold, system, decat/hfc and coilovers along with some OEM S2000 wheels (not sure which year yet)
My friend has sourced me a Mugen twin loop exhaust, 2nd hand however its going to cost about £1200..... alot of money, but my understanding is they are about £1600 new?
Would really like the Toda dolphin tail twin exit though, think they are about £1400 although i heard they are discontinued?
Well the car is going from this:
And both will be coming back GPW in a week or so :thumbup:
Next dilemma is do i get an OEM spoiler for the boot or not??
And im going to source some AP2 side spats also i think, and the black exhaust surround on the AP1, im also going to get that done in GPW, although i may go for a UK spec part as it has the the fog light fitted unlike the JDM version.
Also picked this up the other day from a fellow member of this site.
Should do well. And at the same time as i get that fitted, i will be getting a Toda TCT fitted, valve clearances checked, oil filter change, so should be sounding and running sweet by this point
Then next on the agenda is exhaust manifold, system, decat/hfc and coilovers along with some OEM S2000 wheels (not sure which year yet)
My friend has sourced me a Mugen twin loop exhaust, 2nd hand however its going to cost about £1200..... alot of money, but my understanding is they are about £1600 new?
Would really like the Toda dolphin tail twin exit though, think they are about £1400 although i heard they are discontinued?
starletgtturbo1
Member +
looking good mate. my cousin just sold his skyline and went and bought one of these, hes went mad buying parts lol, he more or less phoned up spoon and asked for one of everthing, and to top it of hes ordered a Pfitzner dogbox
starletgtturbo1
Member +
well it was a mint r34 so he have a fair bit to spend on it, hes a dick though he knew i wanted one.
sanchez
Member +
Ah yeah i hate it when mates do that, knowing you want one!!!
Cheers mate, yeah they are a bitch to change apparently too...
Ah really, what would you get next? Thought you were really loving the s2k?
Btw if you do sell, can you sell me the side spats please dude, cant find them anywhere lol
starletgtturbo1
Member +
i love this mean look, but with a hard top of course
Derek
Lifer
Oh I do love it, not sure if I'll sell it could probs make a lot more I think, but I need something with back seats hence me debating it. If I don't sell it when it comes to selling in a few months I'll make sure to take them off if you still need em.