Knocking after fitting Anti Lift Kit ?

[Julian-ep91]

there is something somewhere that you have not tightend up enough, jack the car up and check every single nut and bolt is tight that you have taken off.

 

[Blak_Mamber]

there is something somewhere that you have not tightend up enough, jack the car up and check every single nut and bolt is tight that you have taken off.

Well Darren @ TM-Developments did the work, so i just hope he tightened up the bits after lol. Im sure he did, and hope its just some bushes that need replacing as Dave said above.

 

[ChrisGT]

How much are a new set of droplinks? Mine look pretty worn too.

 

[sx_turbo]

lewis bring it round mate i'll have a look at it.

dont start buying things willy nilly without finding the true fault.

it might just the anti roll bar knocking.

also ideally you should get the tracking checked, as the alk is supposed to alter the tracking.

 

[sx_turbo]

How much are a new set of droplinks? Mine look pretty worn too.

the links very rarely need replacing.

if anything needs replacing, it is usually just the rubbers on the link, and these can be bought from a dealer, i cant remember the price as it was a year ago i bought it.

 

[Idrees]

What I meant was that the WL drop link bushes do not fit with the stock ARB.

 

[Blak_Mamber]

lewis bring it round mate i'll have a look at it.

dont start buying things willy nilly without finding the true fault.

it might just the anti roll bar knocking.

also ideally you should get the tracking checked, as the alk is supposed to alter the tracking.

ok mate cheers. Darren said that the bushes are worn & they dont cost much from whiteline etc..

I didnt know about the tracking bit though

What I meant was that the WL drop link bushes do not fit with the stock ARB.

I only need the bushes, is that what the drop link ones are?

 

[Gryzor]

Could be either 11 the ARB bushing or 12 the drop link bushing...
Just moving the ARB a bit could sort it.

 

[Blak_Mamber]

Could be either 11 the ARB bushing or 12 the drop link bushing...
Just moving the ARB a bit could sort it.

Cheers for that dude. I think number 11's need replacing anyway, so maybe i should do that & see if it clears it up.

 

[sx_turbo]

ok mate cheers. Darren said that the bushes are worn & they dont cost much from whiteline etc..

I didnt know about the tracking bit though

yeah we'll see lewis.

as i said let me look at it first before you started spending money you dont need to.

the whiteline bushes also as far as i know dont fit the stock links.

 

[Blak_Mamber]

yeah we'll see lewis.

as i said let me look at it first before you started spending money you dont need to.

the whiteline bushes also as far as i know dont fit the stock links.

Ok mate, sounds good. Just let me know when your free etc... thanks again

 

[sx_turbo]

Ok mate, sounds good. Just let me know when your free etc... thanks again

just let me know mate, only night i'm not free is wednesday at the moment.

 

[Blak_Mamber]

just let me know mate, only night i'm not free is wednesday at the moment.

Same here dude, cant do wednesday. Shall i pop by tonight quickly or is that too quick? lol.
If not, just let me know.




EDIT: pm'd instead mate

 

[Monkfish]

Hitting the ARB?

+1.

My Whiteline Anti-lift kit causes the ARB to touch the lower arms. Mine don't knock, but yours might well be.

 

[Gtstu]

my arb touches the lower arm with the white line alk fitted i get a funny noise over small bumps.I think if my car was 5mm higher it wouldnt touch.

 

[weakboy2]

does it kinda creak too? my money is on the front bolt on the lower arms, either not tight enough or stripped the thread. if that is loose it makes one hell of a row!!