Mx6 turbo injectors

[Dazzergt]

Will Mazda mx6 turbo injectors fit the starlet? As these are 330cc wouldbe a ideal up grade if the fit

 

[MentaLEP91]

yes they will fit but for what settup?

 

[Dazzergt]

It's for a td04 at 1bar

FPR
fuel cut
decat
255lph fuel pump
front mount intercooler

Then going to get it on the rolling road and get the unichip mapped to suit it

 

[gorganl2000]

what part number is on the injectors?

 

[Dazzergt]

the part no is 195500-1650

 

[Chris@CCM]

i would no be fitting 330s with out a ecu of some sort stock injectors fcd and reg is ok for one bar if set up rite pal

 

[gorganl2000]

the part no is 195500-1650

i think they are 330cc injectors...HOWEVER, i also beleive they are square clip, so the stock clips (oval) will not fit.........u would also have to get the clips that com with hem and connect them to the harness

might be easier to get direct fit injectors

 

[Dazzergt]

they have the connectors with them so i guess i could wire them in .will i need the fpr and fcd once the unichip is mapped?

 

[coreygodofall]

i just bought a tdo4'd starlet and was told i HAD TO drive it at 0.5bar and take it easy until i get 330cc injectors,,i got it wit an e manage ecu,the lad obviously knew his stuff,, just wondering where to get them also???

 

[speedvision]

i just bought a tdo4'd starlet and was told i HAD TO drive it at 0.5bar and take it easy until i get 330cc injectors,,i got it wit an e manage ecu,the lad obviously knew his stuff,, just wondering where to get them also???

u can get injectors here..check below link

http://speedvisioncps.com/index.php?main_page=index&cPath=10&zenid=515f3149ba23db994ddfefb8908642dc

sam