My Glanza v 280bhp @Flywheel at 1.4 Bar.

[Sam_Brian]

The Glanza V.. Motor done by Tunning Developments...
Thanks again to mike and Nick for the work

Heres a list of the modifcations been done to it guys !!

Tunning Developments Stage 2 Rebuilt Engine.
-Wossner 74.5mm Low Compression Piston Kit with Rings and Pins
-Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts
-Athena 1.2mm Uprated Metal Headgasket
-ARP 2000 Uprated Headbolt Kit inc New Washers
-Genuine Toyota Full Gasket Kit
-Genuine Toyota Oil Pump Kit
-OEM Water Pump Kit
-OEM Cambelt Kit inc Idler & Tensioner
-ACL Main Bearing Kit
-ACL Big End Bearing Kit
-ACL Thrust Washer Kit
-Fully Machined and Polished 4EFTE Bottom End
-Fully Stripped, Cleaned and Rebuilt 4EFTE Cylinder Head to Standard Spec
-Wepr TD04 turbo
-Tm-Developments oil & water line kit
-Wepr externally gated manifold
-Wepr downpipe (decat)
-Tial 38mm waste gate with Screamer pipe
-Half size civic rad
-Rx7 460cc Injectors
-Braided fuel return line
-Trd Oil Filter Cap
-Magnecore ignition leads
-Tuning developments fuel pump
-Emange blue piggy back ecu (fitted and mapped by tuning developments)
-Excedy Paddle clutch
-Chrome dipped rocker cover
-Chrome dipped inlet manifold cover
-Lots of samco hosing
-Forge dumpvalve
-Front mounted induction kit
-J-Peformance front mounted intercooler
-Poweflex engine mounts (all 3)
-Custom 2.5 inch straight through exhaust system
-Clear cambelt cover
-DEI titainium heat wrap
-K&N air filter

Suspension - Wheels - Breaks

-Brand new 15" rota grid drifts & Yokie parada spec2 tyres
-3g Discs on front (neW)
-Red stuff pads on front (new)
-OEM rear dics and pads
-D2 Coilovers

Car is Running 280 Bhp @ Flywheel at 1.4 Bar On Dyno Dyamics!!

More mods to come !!




Ok guys Got Some updates for you !!

Had to replace the WEPR TD04 due to the manifold being cracked everywhere and it was ceased to turbo so didnt want to shear the bolts when taking it apart.... so thought.... hmmmm Time for bigger turbo see went and got this badboy !!

TD05 16g
Getting It changed to external for the SCREAMMMERRRR !!

Also decided to get this ....

Dual breather Cam cover


the Car is currently down at The Best "Tunning Developments"
Getting their ..
-OWN Camshafts fitted
-Turbo fitted and converted to external
-Dual Cam Cover fitted
-Remap it all )

So we Are hoping for well over 300 BHP... LEts see what the guys can do )

(Mods to cum)

-TD Intake Manifold
-SLIP DIFF!!!!!
-KSPORTS!!!!


.. Then
-760cc Injectors
-TD Fuel rail

Thanks Again to Tunning Developments..
BEST JAP TUNERS IN UK !!!

 

[Nick@TD.co.uk]

Thanks Brian

Cheers

Mike Jones
Tuning Developments Ltd

 

[weeJohn]

Thats a great power figure from a TD04, well done lads.

 

[buckets]

very nice power that car must be great to drive

 

[_shaun_]

great power but surely a proper break upgrade is needed

 

[Chris_14a]

I seen this car when it was at the unit very nice looking car mate .Congrats on the power

 

[Sam_Brian]

Cheers Guys !

Tunning Developements for the win :rockon:

And Yup Brakes will be Done once Cams Etc are done

 

[spuddy]

Cheers Guys !

Tunning Developements for the win :rockon:

And Yup Brakes will be Done once Cams Etc are done

I see we think alike lol! Power always takes preferance to slowing down

I've blueprint stock disks and pads on mine still, need to see 600hp before I'll even consider the brakes

 

[wickedep]

I see we think alike lol! Power always takes preferance to slowing down

I've blueprint stock disks and pads on mine still, need to see 600hp before I'll even consider the brakes

haha spuddy. dont worry mate..you can always use a parachute!!


nice car brian..hope you dont mind i shared your pics on our Fb page. cheers..

sacha

 

[spuddy]

haha spuddy. dont worry mate..you can always use a parachute!!


nice car brian..hope you dont mind i shared your pics on our Fb page. cheers..

sacha

The cops seem to get annoyed about the parachute at T junctions, no idea why!!!

Send me a link to your facebook page.

 

[Chris_GlanzaV98]

I see we think alike lol! Power always takes preferance to slowing down

I've blueprint stock disks and pads on mine still, need to see 600hp before I'll even consider the brakes

hahaha amazing priorities