newbie from scotland member on uksc with glanza v td05 forged brides etc
- Thread starter leeg22
- Start date
scrappygit
Member +
hi there. 
i love those wheel.
i love those wheel.
thanks for comments. yeah a got the wheels last xmas time, there 15" lorber wheels, they were needin refurbed so done them myself at the cost of £25 and turned out better than i expected i also have two other set of wheels for it, got advan sa 3r 16" and enkie big end rodders 15"
dont really know yet tbh theres a place called g.i motorsport next to my but unsure of them but my mates have had there vags mapped there and are really happy. is there anywhere good in scotland for mapping? or would i b better heading down south??
hubbygt nice v in ur profile pic is tht urs??
hubbygt nice v in ur profile pic is tht urs??
hubbygt
Member +
That was my glanza aye. Unfortunately I sold it.
Running a tdo5 gt advance nowadays.
I used to use Dastek in dalgetty bay fife and was always happy with them as there mapper jerry gaffney is a Toyota specialist himself. Not too sure about taking one there for a big power outpu like the tdo5 tho as I've never really heard anyone on here go there tho.
Was thinking of going down to tuning developments in Warrington at Easter tho.
What's the full spec of yours mate?
Running a tdo5 gt advance nowadays.
I used to use Dastek in dalgetty bay fife and was always happy with them as there mapper jerry gaffney is a Toyota specialist himself. Not too sure about taking one there for a big power outpu like the tdo5 tho as I've never really heard anyone on here go there tho.
Was thinking of going down to tuning developments in Warrington at Easter tho.
What's the full spec of yours mate?
ive jst taken this from my build tread on uksc
hey been on here for a while but never started one of these.lol had it just over a year was bought as a run about (got it for a good price) as i had subaru tht had blown gearbox at the time but ended up selling it as the glanza was more fun.lol
its 1996 glanza v in white spec when i bought
ingnis recaros
tein coilover (pumped)
15" enkie big end rodders
hks silent cat back exhaust
trd quickshift
98 spec rear lights
momo steering wheel
air filter relocation kit
jam actuator
jam fcd
gutted cat
splitfire earthing kit
uprated ht leads
used it as a daily runner up until start of may when i melted number 1 piston since then its been my project this is spec so far
fully engine rebuild with
scat conrods
ross racing pistons 74mm
arp bolts
1.2mm metal headgasket
toyota seal kit
speedvision mild steel manifold
speedvision decat
speedvision braided water lines
speedvisionfront mount ic
td05 16g turbo from scooby
460cc injectors
uprated fuel pump
fse fpr
blitz bov (not fitted at the mo)
greddy emu
bride lowmax kevlar driver seat
bride passenger seat
stripped out rear
zisco 6 point rear strut brace
luke 4 point harnesses
omp dished sterring wheel
razo pedals
tom's gearknob
hks boost guage air flow ratio guage
15" lorber alloys arden blue centres
meister zeta r coilovers
3g drilled and dimpled disks with yellow stuff pads
8k hids
polycarbonate windows
gizzmo ebc
toyosport civic rad
catch can
turbo timer.
the gt did u get it off a guy in stranraer??
hey been on here for a while but never started one of these.lol had it just over a year was bought as a run about (got it for a good price) as i had subaru tht had blown gearbox at the time but ended up selling it as the glanza was more fun.lol
its 1996 glanza v in white spec when i bought
ingnis recaros
tein coilover (pumped)
15" enkie big end rodders
hks silent cat back exhaust
trd quickshift
98 spec rear lights
momo steering wheel
air filter relocation kit
jam actuator
jam fcd
gutted cat
splitfire earthing kit
uprated ht leads
used it as a daily runner up until start of may when i melted number 1 piston since then its been my project this is spec so far
fully engine rebuild with
scat conrods
ross racing pistons 74mm
arp bolts
1.2mm metal headgasket
toyota seal kit
speedvision mild steel manifold
speedvision decat
speedvision braided water lines
speedvisionfront mount ic
td05 16g turbo from scooby
460cc injectors
uprated fuel pump
fse fpr
blitz bov (not fitted at the mo)
greddy emu
bride lowmax kevlar driver seat
bride passenger seat
stripped out rear
zisco 6 point rear strut brace
luke 4 point harnesses
omp dished sterring wheel
razo pedals
tom's gearknob
hks boost guage air flow ratio guage
15" lorber alloys arden blue centres
meister zeta r coilovers
3g drilled and dimpled disks with yellow stuff pads
8k hids
polycarbonate windows
gizzmo ebc
toyosport civic rad
catch can
turbo timer.
the gt did u get it off a guy in stranraer??
Last edited:
might take it to them but will see what happens.
also got a bee*r rev limiter for sale had it in glanza for 8 months dont need now as got emu.
fits perfectly behind bumper no cutting what so ever apart from ive moved number plate to passenger side.
Think it would be same with ct9? first glanza ive seen with an intercooler behind the bumper with no cutting