SAFC before or after or inline with HKS FCD?

[Sii]

Guys,

Just about to wire in an HKS FCD and the car has a SAFC wired in, obviously they share the same wires.

Is there a rule to which has to go closest to the ECU?

Cheers

In the garage now on the laptop .....

Sii

 

[Gtstu]

http://i140.photobucket.com/albums/...GT Turbo/Technical/SAFCFCDWiringDiagram-2.jpg i found this i think its right

 

[scot-ish]

that link is correct, i wired mine in last week like that

but what are you using the safc for when youve got emanange in??

 

[Gtstu]

that link is correct, i wired mine in last week like that

but what are you using the safc for when youve got emanange in??

and why a fcd too?

 

[scot-ish]

oh aye lol, maybe its a different car then lol

 

[Sheldon]

fcd closer to the ecu! thats how i wired mine and was fine.

 

[HYBRID]

hks fcd & safc = FAIL

u need to use a clamp type fcd not a resistor type..

kon

 

[Sheldon]

hks fcd & safc = FAIL

u need to use a clamp type fcd not a resistor type..

kon

yer i forgot to say i had a jam bcc not hks fcd...

 

[scot-ish]

hks fcd & safc = FAIL

u need to use a clamp type fcd not a resistor type..

kon

is fitted on my car, and is working, and is used plenty plenty times on aus starlet before they used the SAFC on its own to drop the map reading

ive just build a FCD with a dual op amp, as a clamp circuit, and i will fit it next week to see if it makes much difference with it, im assuming the HKS works like by offsetting the map signal?? and if the signal was 5v, it would still give FC depending on which setting of the potionometer your using??

 

[Derek]

Kabooooooooooooooooooooooooooooooooooommmmmmmmmmmm!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[sx_turbo]

hks fcd & safc = FAIL

u need to use a clamp type fcd not a resistor type..

kon

if you use an rrfpr and use the safc to trim the fuelling down (instead of trying to use it to add fuel) it works perfectly fine.

 

[scot-ish]

if you use an rrfpr and use the safc to trim the fuelling down (instead of trying to use it to add fuel) it works perfectly fine.

thts the impression i got, as i read up ages before i bought them, altho i wish i knew how cheap the emb is now, i wud have just got it instead