screamer pipe, pros and cons

luke_gt_ep82

Member +
not sure if this is the right place, sorry if not. am thinking bout a screamer pipe and was just wanted to know the ups n downs on em, are they good on a standard ct9, will it make the `screamer noise` on standard turbo? and as any one ad any problems? am just after general thoughts on em please :)
 

b0t13

Fresh Recruit
dont think they damage the turbo, but they sound fuckin sex

theres a GT-4 near me with one and it sounds amazing!
 

luke_gt_ep82

Member +
nah, ive heard there mena b good for performance, as the waste gate just dumps straight out the screamer part, and not putting bk into the down pipe, bt not 100% sure just wanted a few different opinions
 

Timmy

Member +
doubt you would notice any difference over a normal decat on a ct9. Heard lots of sound clips on ct9 aswell and they sound crap imo, but thats personal preferance i guess.
 

Jay

Admin
MOT could prove to be a problem depending on the tester. They can class it as an exhaust leak...
 

dac69er

Super Moderator
alot of people find it hard to seal the gap between the wastegate and the exhaust wheel as they are combined in the housing and not separated like alot of other turbos.

in my opinion its not really worth it on the ct9
 

luke_gt_ep82

Member +
yeah i know bout MOT, but you can `bung` it up for it, and aslong as they dont hit full boost, the waste gate shouldnt open, should it??? as far as performance goes,not really that botherd am happy with wot i got, just want it really for the that noise
 

Timmy

Member +
You can't bung the screamer pipe there's be nowhere for the exhaust gas to go. it would be like the waste gate is shut and it will over boost. Or pop the bung off. Plus i think the mot tester won't except it.
 

Cooch

Member +
I fitted one to mine. Couldnt get it to seal properly although some people have. Its a horrid noise on a CT-9 and in my personal opinion a waste of time. A decat would be the best best mate. Or get a bigger turbo and a screamer! Lol
 

luke_gt_ep82

Member +
when you say cant get it to seal, where do you mean, round the down pipe off the turbo,or where the waste gate is seperated to the down pipe? also if i can get it 2 seal, will it make that screamer noise on a standard ct9 turbo?
 
Top