RoyalDutchie
Member +
Does anybody have the dimensions of the pan hard rod? Want to weld one up but I do not have a spare one yet sadly.
The stock V indeed. Can you also measure the diameter of the holes where the bolts go through?Stock V?
I have a few standard ones lying about, will check them out and report back.
The adjustable ones aren't too expensive but I'd never stand in the way of invention
That is to much DIY for meI used a stock one, chopped it and welded an adjuster in. Never actually got round to using it though!
They aren't expensive for sure, but still need to pay a hefty shipping fee to the Netherlands as well. More interested into make one myself, even though I'll probably end up buying one in the end.I think they are around 80 Quid's new the adjustable ones
Seen them before, they are the cheapest and seem to be good. But already set on making one of 316 stainless steel. Personally prefer thing that are hand made by myself instead of just bought.
Anyone got the panhard rod measured up including the bolthole sizes? Thinking about welding one up of 316 in Januari.
Looking good, this information will be put to good use for sure. Do you maybe know the name of those 2 side threaded bolts with the centered nut?hopefully this will work.
that should include all the dimensions that are important.
drawing is not to scale of course
Looking good, this information will be put to good use for sure. Do you maybe know the name of those 2 side threaded bolts with the centered nut?
The 12mm and 18mm dia is meant for the bolts right? Do you also have the inner/outer dia of the cylinders where the bushes go?
Thank you very much for all the information.
If you check your account->preferences->Privacy->Start conversations with you. You should be able to check if it is member only or not active.
Wouldn't have guessed they call them jack screws, just need to do abit of research on the topic of galling with zinc and stainless steel
What would the spacers be needed for? Let's say I have bushes which have a inner dia of 18mm and 12mm including the metal bush. Would spacers than be required?
Thank you for al the information I'll be making one of stainless steel. If I Remember correctly the RSR panhard is also made from stainless or maybe aluminium they came polished and by the looks of the welds they must be stainless?