Which pistons and rods

[Jammy3990]

Hi,
which pistons and rod combo shall i get wisco pistons and scat rods or wossner pistons and pec rods i know scat rods need the block notching but im not really bothered any help picking which set.
Thanks James

 

[AdamB]

All depends on your budget mate. Scat rods are heavier than other forged rods and do require the block to be notched which is why they are cheap.
If it was me I would be getting pauter rods with pistons.

 

[GTwayne]

Wossner pistons with PEC rods or if you want to spend the extra, pauter rods.

 

[John@ECC]

How much BHP are you after??? I can highly recommend the Wiseco pistons and scat rods, we have used them in many builds.

 

[Chris@CCM]

Don't go for pec rods there wank

 

[Jammy3990]

How much BHP are you after??? I can highly recommend the Wiseco pistons and scat rods, we have used them in many builds.

Im not too sure as dnt want to figure chase but wil be prob going down the garrett gt28 or 30 route

 

[bongskag]

USA is well cheap at the moment, about 650 all in,

Includes:

Wiseco 74.5 mm turbo dished pistons 8.5 compesion (4 ea), piston rings (4 sets), wrist pins (4 ea) and locks (8 ea)

Scat connecting rods (4 ea) with ARP 3/8" rod bolts.

 

[John@ECC]

Im not too sure as dnt want to figure chase but wil be prob going down the garrett gt28 or 30 route

For that i would recommend Wiseco pistons and Pauter rods. If you want a price send a PM to ECCSales and he will sort you out.

 

[madman]

PEC rods are shite go for pauter or another WELL KNOW BRAND

 

[bongskag]

USA is well cheap at the moment, about 650 all in,

Includes:

Wiseco 74.5 mm turbo dished pistons 8.5 compesion (4 ea), piston rings (4 sets), wrist pins (4 ea) and locks (8 ea)

Scat connecting rods (4 ea) with ARP 3/8" rod bolts.

these are best combo you will find unless you want to pay 800-900 quid, use the money saved on a nice rebore and a crank regrind, get hold of christian from alamo, he will mark them down so you dont pay import charges.