Windshield Washer Bottle Pump Connector what does it look like?

N

nyahbingi

Member +
Had the windshield washer bottle out of my EP82 for some time, finally got a replacement and after installing it realised the pump is a 2-pin connector compared to only free jack in my EP82 where the bottle fits which is a 3-pin, NOTHING similar to what is required.

Can anyone take a pics of the jack that connects to the washer bottle pump and also point me in the direction of where to trace it from? Maybe it fallen somewhere and i cant locate it.

Thanks in advance.
 
Jay

Jay

Admin
ABS models have a different plug than the non-ABS models. Common enough challenge to run into when handed one to fit. You can either source a plug to suit the new pump or another plug of the correct type mate.

Jay
 
MarcoGTTurbo

MarcoGTTurbo

Member +
like jay said ABS has the 2 pin type, my non ABS EP has 3 pin connector same as this

washerbootle3pin.png
 
Jay

Jay

Admin
ABS model has the washer bottle in front of the passenger side front wheel.

Non-ABS model has the bottle behind the driverside headlamp.

The connector will be in one of those two places, find your front panel wiring loom and trace it from the fusebox forwards. The connector should be on it somewhere.

Jay
 
N

nyahbingi

Member +
Thanks jay, i have the non abs model the the bottle is behind the headlamp.

I will have to do some serious investigation over the weekend.

Will keep you posted.

Everyone Repped!
 
You must log in or register to reply here.
Top