2 Speedo videos of my EK9

[Dan3SGTE]

@lornce, thanks you for nice comment .... I do also like the feel alot....

@lingl9Z.... Well, recently it isnt as good as it was, but its something to do on a saturday night, take a trip down there.... There is always a bit of action up there

 

[Derek]

Ill do a video in my integra and we can compare the two.

 

[Dan3SGTE]

coolio,

Will try and make a better one and post it up, as that was a messy video lol

 

[lingl9z]

hehe, beats staying in i guess! well drop me a pm when you go!

 

[cantbassed]

drop us a pm too!

 

[Dan3SGTE]

Will do matey! I'll let you both know!

 

[lingl9z]

Will do matey! I'll let you both know!

Cheers bud! =]

 

[cantbassed]

cheers

 

[Mikey B]

Sweet you are going to the meet on the 6th ill see you there in my EK9

what speed would you say you can do in 3rd to the limmiter? MPH

 

[Dan3SGTE]

Sweet you are going to the meet on the 6th ill see you there in my EK9

what speed would you say you can do in 3rd to the limmiter? MPH

Hi mate, yuup, i will be there too

I have a spoon ECU now so at the limiter 9100RPM hits around 100MPH taken all the way. Whilst stock RPM limit was 8600RPM and hit like 92MPH.....

 

[Gee]

Even so mate, that would be SERIOUSLY slow if it was KPH..... 0-60MPH in like 13-14 seconds

Wasnt counting to be honest mate, just watching.

 

[Dan3SGTE]

ok cool

 

[Derek]

Do you seriously get 100 mph in third gear? my teg wont do that.Probs geared different.

 

[Dan3SGTE]

Do you seriously get 100 mph in third gear? my teg wont do that.Probs geared different.

yeah teggies have the 4.7 final drive whilst the EK9 has the 4.4......

Your first 3 gears would be shorter then mine then your 4th will be the same and so will your 5th gear...... But remember i have a spoon ECU which has f=giving me and extra 500RPM in each gear.... Stock i could only do 92mph. my 4th gear now gets to 130mph, 5th is geared to around near 170MPH now, like it would ever get there lol.

 

[Jay]

A mate works in a Honda garage, he sent me this..

http://uk.youtube.com/watch?v=9UcVfJCiurU

(just for comparisons sake..)

 

[Derek]

ah i see, Whereabouts is the ecu located on your car? cant find it on mine for the life of me. mine limits at about 9,500 revs.

 

[Corey_gt]

A mate works in a Honda garage, he sent me this..

http://uk.youtube.com/watch?v=9UcVfJCiurU

(just for comparisons sake..)

Rofl shes quick!

 

[Derek]

A mate works in a Honda garage, he sent me this..

http://uk.youtube.com/watch?v=9UcVfJCiurU

(just for comparisons sake..)

Lol:haha:

 

[Gee]

A mate works in a Honda garage, he sent me this..

http://uk.youtube.com/watch?v=9UcVfJCiurU

(just for comparisons sake..)

Bloody hell!

Got a spec list?

 

[Dan3SGTE]

ah i see, Whereabouts is the ecu located on your car? cant find it on mine for the life of me. mine limits at about 9,500 revs.

On the EK9 its located in the passenger footwell/think its called a kick panel, something like that.... The plastic panel on the left side of the footwell. Take that off and check there.....

9500RPM, thats a very high limit, you wana watch out as the stock B18 engine/with stock compression Doesnt like much higher then 8800RPM, stock B16B is unsafe after 9100RPM..... As its same block just thicker walls on the B16B........ Unless of course your engine isnt standard?

A built up B18 can take 10,000RPM :rockon: