Recent content by clys

Anyone? Could I be missing something minor here? I just know there's guys easily running 1 bar on stock injectors, and I can't even do it with 315's?

Hey guys, I'm running a BPU GT. Mods: -FMIC -315cc injectors -SARD FPR @ 50psi base -Intake -2.5" Turbo back straight pipe -Zisco Manifold -HKS Actuator -Blitz Access ECU My boost creeps up to 14psi, then settles at 12. At the point it's at 14, my AFR is at about 13.8:1, then once...

I live in Canada homie, none of those here!

Very impressed with my ~180BHP EP... E46 M3 took me only by 1/2 car in a 3rd gear roll, all b-series civics are mine, including integra type r's. SR20DET's and me are quite close, but i usually pull a fender. Fast, but needs traction desperately. The passenger front tire needs replacing almost...

Washer fluid pump available?

I apologize for asking such Mickey Mouse questions, just trying to get you sorted as I know the frustrations of these minor issues. You've said all cam and crank markings are lining up as well, even after 4 revolutions of the motor. Where exactly is the timing mark sitting?

And you are loosening the 12mm bolts and adjusting the dizzy while viewing the crank?

Clean the pulley with brake clean, and take a white paint marker and dab it on the notch in the pulley. This is a sure way to make sure you're seeing the real TDC. Try that out and let us know how it goes. Also, are you jumping the Te and Te1 ports on the diagnostic module when checking your...

I drifted mine out with a hammer, then realized my shop had a press. Huge bitch to do because they carrier doesn't sit level on anything, so half your strength is dedicated to holding the damn thing still. I will use a press to set the bearing back in the carrier, and then torqute the...

Thank you, email replied to. :)

Martina replied to one of my emails, seeminly only because camskill brought it up with Toby. They denied ever receiving anything about rush shipping etc. However she did refund the money.

Dave, what is the fastest you could get me a front wheel bearing kit? I called and emailed you, and I know it's a Sunday, just making sure I've got all the bases covered as it's urgent. Thanks Dave.

Use proper punctuation and sentence structure Tommy, it will allow us to help you much more effectively. GTnomez is up early in the morning trying his best to help and all you can give him is this mish mash? Help us help you. Under load is when you see the coolant overflow? I've seen this...

Ordered a wheel bearing 6 days ago, still not here (not really expecting it yet either), but it's the communication I'm pissed about. I've sent 3 e-mails asking about rush delivery, none were responded to, so I ordered anyways, as my car is apart in my shop and it's my daily driver, I simply...

And I'm from Canada. Lots of EP's down there?