Search results

Where can you get an act clutch for a ep82 it's not listed on there website

Can an aftermarket diff be put into a non LSD box ?

Well lads after going td04 and wondering where is the best to have dumpvalve hot or cold side and how close to the inlet have heard mixed reviews ?

Gearbox or something to do with drive has come under load like coming down through revs like a bearing gone box fucked ? Or worth repairing

Well lads I'm considering ditching the power steering but keeping the rack by the looks of it there s to pipes on the rack that can just be run into each other should work ? Any one tryed this ? I've heard there's much better feel without it and plus the bay would look so much tidyier

Well lads looking for a td04 or the vf variant don't want one with wastegates welded and actuator not important ...flange from turbo to manifold must be the triangle one

Well lads is there a gasket you can get for the sump or do you just use sealant ? If so what do ye find the best ?

Just been on donedeal.ie for the first time in ages and can't get over the amount of glanzas and gts up for breaking :( by the looks of it a gt will be a rare enough car to see on the road in a year or 2 ! Are people breaking these due to not having the money to repair after an engine failure or...

Well lads just curious to where ye buy your vacuum hosing ? Seen some on eBay but is it good quality? What sizes do I need 4mm and 6 mm ?

I no there's loads of threads but none matched what I needed to ask going to be running a bar on standard turbo would I get away with a blue print clutch don't really fancy paying 300 odd quid for a exedy stage one any advice ?

Have any of ever fitted a different final drive on here ? Done some searching and apparently one from an mr2 fits do you just need the final drive or have you to modify anything else ? Any info greatly appreciated

Should there be connections in ports 1 and 2 ? How many wires should I have coming out ?

Any one no anyone who's good that works with starlets in Ireland ? Looking to get a few bits done

What does the screw on top of the inlet manifold adjust ? Reason I'm asking is cause mine is tightened in all the ?

Doing the ignition timing on the car and when I set it to 0 degrees car ticks over lovely but when you go to drive its like its flooding itself still drives but just doesn't feel right .have checked the engine timing and that's all bang on ... I did a diagnostic check and got code 12 so it's...

No eml or fuel pump any ideas ??

Car was left lying up for about 4 weeks noticed when I started it was smokey one of the lads then pulled of the cold side ic pipe and held it away from the intake when ya drop the boot it would spit of a bit of water cleared out after doing it 2 or 3 times .hardly condensation ? Cant be...

Lost the keys to the car looking for the full unit the bolts to the colum ..will need delivery aswell to Ireland ...might be interested in full lock set also price depending

Lost the keys of the car Friday fairly raging now nowhere to be found car isn't locked so not to bad the keys for my doors and the ignition were different so what's my best option ?

Well lads have a 60 mm boost gauge looking for somewhere in the centre console or anywhere tidy to put in the middle few pics be great to give me some inspiration ha cheers