** How To Make Your Exhaust Pop **

i have better things to be doing,and id rather not drill a hole in my exaust!!lol

Mine does pop. not any spark in the exhaust or anything.
Full exhaust setup with standard ct9 and fmic and jam ecu and worked head.

I have somethimes flames out of the exhaust of 30cm!

Maybe is this the way to do it and not with a stupid spark plug that would kill your exhaust.
 

superspat

Member +
i get pops and flames all nite long once the turbo and exhaust is nice are hot on a hybrid ct9 with rrfpr and jam fuel cut:haha:
 

Matchew

Member +
Buddyclub spec II heatwrapped to the exit slightly rich map pops and flames like theres no tomorrow when hot enough
 

Duff

Member +
Gonna give the bolt in the exhaust thing a try later on for the craic! Doubt it'll work though!
 

Starlet_EP82

Member +
basically,you put a bolt in the backbox as far back in the tip as u can,usually if you have a decat it tends to make the car overfuel slightly,so give it a nice rev and as the revs come back down it spits unburnt fuel through the exhaust pipe and out of the backbox,the sharp end of the bolt heats up enough to ignite the unburnt mixture.i know people will say it doesnt work etc but i KNOW it works,i have a friend with a 200sx that does it,a friend with a wrx and i did it on my old 205. i dont know the scientific side of it but hey,for the price of a bolt and a little bit of work give it a try... i got this in a pm might try it
 

Jay

Admin
And I will ask AGAIN..

Mate your a Joke I asked for my refund so many times and u never reply to pms I know this the wrong place for this but this idiot sold me a fake his ssqv and I want my mney back- it's been nearly a yr now.

Original thread -http://www.toyotagtturbo.com/forums/showthread.php?t=37919*

Seeing as you are online, please give this post from earlier your undivided attention.
 
Top