weeJohn
Lifer
Fitted these last week before a track day. Excellent brakes, more stopping power and very little fade all day, thats not even on Toyota discs and pads, just spurious items.
The track has 2 long straights so there is heavy braking from about 110mph into a 60mph corner and also a hairpin, they felt good and were a lot better than the Gt 10 groove 3G and Mintex 4411 pad set up I was using before.
I would like to get the longer studs for mine. I only got 6 full turns on the wheel nuts. I think the threads are 1.5mm pitch, so thats 9mm of thread used. For 12mm studs you should have 18mm of thread used.
Does someone have the longer studs part number handy?
The track has 2 long straights so there is heavy braking from about 110mph into a 60mph corner and also a hairpin, they felt good and were a lot better than the Gt 10 groove 3G and Mintex 4411 pad set up I was using before.
I would like to get the longer studs for mine. I only got 6 full turns on the wheel nuts. I think the threads are 1.5mm pitch, so thats 9mm of thread used. For 12mm studs you should have 18mm of thread used.
Does someone have the longer studs part number handy?