Looks asif its for an Ep82 as it has two plugs which connect to the stock ecu, and looks asif you will only use two holes for the plugs from Engine wiring loom into that wiring loom, instead of the three holes.
how do you do that mate I haven't a clue really , I bought it of Ian on the forum.
I dont even know what bits are missing
Thats what I thought fella I may have to be taking a trip to Burwashes or Deano's with this Loom as they seem to know and have wired in these om their Cars
AFR tuning will know what to do mate.
it's easy to do if you know the pin outs on both ecu's
and you'll need to buy the 4 pin plug from toyota if they do it
If you come to Deanos let me know
Mate, that aint a cruisse loom at all. that looks to be the end an ep91 engine loom that some one has tried badly to mate with the cheaper HKS universal loom. here is what my end looks like, you can see that its an cruisse loom as it has the TP-19 sticker on it. it i were u id find Ian slap up his clart for this, as you loom is in ur had is £80+ and the cruise loom is now £400+.
will do fella Ill be in Duratec HE power though lol
Ah you'll get smoked by the Hatfield crew then :haha:
So its just a case of figuring out what wires are for the TPS and what ones are for the Map sensor.
you only need to wire in the tps i think
The cruise loom should have these