HKS F-con Vpro Gold (Cruise EP82 Loom)

TO82

TO82

Member +
Looks asif its for an Ep82 as it has two plugs which connect to the stock ecu, and looks asif you will only use two holes for the plugs from Engine wiring loom into that wiring loom, instead of the three holes.
 
KrissyB

KrissyB

Member +
TO82 said:
Looks asif its for an Ep82 as it has two plugs which connect to the stock ecu, and looks asif you will only use two holes for the plugs from Engine wiring loom into that wiring loom, instead of the three holes.
Click to expand...

Thats what I thought fella I may have to be taking a trip to Burwashes or Deano's with this Loom as they seem to know and have wired in these om their Cars
 
sx_turbo

sx_turbo

Lifer
KrissyB said:
how do you do that mate I haven't a clue really , I bought it of Ian on the forum.

I dont even know what bits are missing
Click to expand...

AFR tuning will know what to do mate.

it's easy to do if you know the pin outs on both ecu's

and you'll need to buy the 4 pin plug from toyota if they do it
 
Last edited:
TO82

TO82

Member +
This is mine for an EP82, looks different to yours, as it only has two inputs for the engine wiring loom.

DSCF1827.jpg
 
KrissyB

KrissyB

Member +
Ricky@JAP MAD said:
AFR tuning will know what to do mate.

it's easy to do if you know the pin outs on both ecu's

and you'll need to buy the 4 pin plug from toyota if they do it
Click to expand...

Yeh matey Matt will know what to do hopefully just want everything to be perfect when it goes down End of Feb.

Once she is mapped then I can start planning for the nexy stage of Mods
 
D3N0

D3N0

Member +
Mate, that aint a cruisse loom at all. that looks to be the end an ep91 engine loom that some one has tried badly to mate with the cheaper HKS universal loom. here is what my end looks like, you can see that its an cruisse loom as it has the TP-19 sticker on it. it i were u id find Ian slap up his clart for this, as you loom is in ur had is £80+ and the cruise loom is now £400+.

DSC00345.jpg
 
KrissyB

KrissyB

Member +
D3N0 said:
Mate, that aint a cruisse loom at all. that looks to be the end an ep91 engine loom that some one has tried badly to mate with the cheaper HKS universal loom. here is what my end looks like, you can see that its an cruisse loom as it has the TP-19 sticker on it. it i were u id find Ian slap up his clart for this, as you loom is in ur had is £80+ and the cruise loom is now £400+.

DSC00345.jpg
Click to expand...

Everything looks the same as the pic in the RHD japan Picture though

Just uber confused now
 
D3N0

D3N0

Member +
Cruisse Official part number for there EP91 HKS loom is TP-19, as you can see its on my loom and you old loom which you swopped with Ian. you current loom isnt a cruisse loom, its a universal loom from HKS themselves. i dont know the cruisse official part number for the EP82s though. the loom TO82 has is an Official HKS one, made by HKS them self.
 
KrissyB

KrissyB

Member +
Well I just checked it and it fits perfectly with the 82 ECU the reason the 3rd part of the Plug is cut is that the 82 only uses two plugs unlike 3 in the glanza guys.

So its just a case of figuring out what wires are for the TPS and what ones are for the Map sensor.
 
KrissyB

KrissyB

Member +
munday said:
Ah you'll get smoked by the Hatfield crew then :haha:
Click to expand...

LOL hehehe. No ST's as low as me though ;)

Im so lazy I should have gone and checked earlier to make sure but all plugs in nicely.

Its just a case of sorting out Auto TPS and MAP sensor
 
D

Dave@TM-developments.com

Trader
I doubt you would get them from Cruise. The map sensor connector is generic so no problem. All you need is the the TPS connector which you should be able to get from a breakers
 
You must log in or register to reply here.
Top