Search results

  1. S

    1996 Glanza V Turbo (Genuine Low mileage with proof of the km!!!!)

    For Sale: 1996 Glanza V Turbo (Genuine Low mileage with proof of the km when it came into the country) Item Condition: Good Price And Price Conditions: £2400 ono Reason for a very reluctant sale because I need a bigger car now or I would be keeping this but we need a 5 door car now. Extra...
  2. S

    White smoke!!

    I was leaving work this afternoon and I noticed that after about 5 - 10 minutes of it idling it was smoking quite a lot, it's smells like it's over fuelling, Iv got a video of ot smoking at could someone tell me what they think it could be please
  3. S

    Boost kicks in about 5k rpm

    I found out today after going for a long boring drive that i do have boost but it doesn't kick it till about 5000 rpm when before it use to kick in about 3000 rpm. I have recently fitted a front mount intercooler and since after i fitted it i haven't had boost, or so i thought, is there any...
  4. S

    No boost after fitting front mount intercooler

    Hi everyone, I fitted a front mount intercooler last weekend and it isn't boosting at all, iv got a front mount air filter as well but i had to turn the filter so it faces down because it wouldn't fit to the front behind the grill with the standard radiator on, i also had to get a new pcv...
  5. S

    Glanza's front mount intercooler

    I'm wanting a front mount intercooler for a glanza with all the piping.
  6. S

    Adrian Flux, Cheap as chips!!!!

    I got a quote from Adrian Flux the other day and was really shocked at the price they gave me. Im 24, 7 years no claims bonus. 2 None fault claims 6 Points The mods are 15" Desmond Regamaster wheels. HKS full Exhaust. Tein lowering kit. Front mount air filter. and soon to be a...
  7. S

    HELP!!! Got an annoying squeak in engine bay

    Hi every one, Hope that someone can help me, iv got an annoying squeaking coming from somewhere in the engine bay but can't figure out whats making it, i know that it isnt the alternator bearing or the water pump as i loosened the belt that drives both and started the car and was still doing...
  8. S

    Alternator rebuild???

    Hi guys, Iv searched hi and low but can't seem to find a Tutorial on it. Does anyone know where there is one for rebuilding a Glanza Alternator please? Cheers Spence
  9. S

    14" wheels over standard breaks?

    14" wheels over standard brakes? As the title says as I'm after some cheap 14" wheels so I can get my Regamaster's refurbed? Cheers Karl
  10. S

    Desmond Regamaster Evo Wheels

    Hi everyone. Iv just found out today that i have a set of Desmond Regamaster Evo Wheels in 15" (Thought they was Rota Slipstreams before lol) and was wondering what price they are worth? Cheers Karl
  11. S

    Question from a novice

    Hi everyone, when i change the pipes over on the boost solenoid so its running high boost in all gears, some times it jolts for about half a second and then starts boosting fine. Is that what i hear is called fuel cut? If it is, i dont get why its doing it because fitted to the car is a...
  12. S

    Lo/Hi Boost button not working

    Hi guys, Iv fitted a front mount air filter and i decided that i don't want to run high boost all the time so i put a hole with a connector (so i could still have low and high boost and would still be like it was before i fitted the air filter to the front) in the pipe work fitted to the air...
  13. S

    Uprated Suspension struts for a Glanza

    Hi peeps, Iv got a Glanza and its sitting on Tein lowering springs with standard shock absorbers and was wondering if there is any uprated/ stiffer ones that i could get to change to as the ride is a bit bouncy lol. Cheers Spence
  14. S

    Exhaust fitting?

    Hi everyone, Does anyone know of anywhere around Doncaster/ Sheffield that makes exhaust's out of stainless steel good but cheaply as i have bought and exhaust from someone off here but need it to fit my EP91 plus i need a front pipe/flexi-pipe making for it? Can anyone give me any...
  15. S

    Bolt in alloy wheel valves??

    Does anyone know where i can get some valve's to fit into Rota Slipstreams? I have found some but i cant find any with the diameter where they fit into the rim of the alloys, but they are all too big to fit into them. The size that i have got is 7.93mm / 0.312inch Can anyone point me...
  16. S

    Glanza Specifications

    Hi guys, im just trying to find out what the specifications are on a Glanza V because im having an argument with a guy that i work with (basically a Chav) that my car isnt as quick or can produce as much as im saying that they do. So could someone help me out with a Spec sheet on Glanza's...
  17. S

    Meet somewhere??

    Hi guys n gals, Just wondered if anyone fancied doing a meet within the next month or so, somewhere in the middle of where people live or just at Cleethorpes? Any suggestions to where people think would be good to get some pictures and put faces to the names of people on here lol. Spence
  18. S

    Misfire on idle :s

    Hi everyone, Iv done abit of work on my car today, changed the alternator and water pump, and before i started removing anything it was running fine, and then after I finished and put everything back together, I started it and now, for some reason, it seems likes its misfiring on idle but...
  19. S

    Would these fit?

    Hi guys, I've found some alloys I'm very interested in buying but not sure of they would fit a Glanza, so could people help me and tell me if they wild before I buy them. I'm after some Compomotive Mo5 wheels 15" ET49 6j 4x100. I use to have a set of these in my previous car but in 16" and...
  20. S

    Water pump fuse

    Hi guys, Which fuse in the fuse box for the water pump as I think mine has gone and want to check the fuse first before I do anything. Basically my expansion tank for my water is bubbling over and it is over heating quite rapidly so I do t think the water pump is working. Can anyone...
Top