Search results

Oh my bad, I thought the difference is somewhat like 4E-FE and 4E-FTE.

Turboing a 2jzge on stock internals?

26 views and no reply???? c'mon mates!!

Hey everyone. I was running a stock 4e-fte in a Corolla AE101 until I decided to go for an upgrade. Upgraded to a T25 a/r .42 turbo - spool was good and boost was better than a CT9 as well until I came across some serious issues i.e. turbo oil leak, timing seals leaked, tappet seals leaked, car...

It actually is pretty awesome - Virtually no lag but I feel I'm missing the top end a bit though. Running 0.5 bar right now, intend to go up to 0.8

It should be T25 then .. I was told its a gt28

GT28 a/r .42 .. Spools at 2400rpm

Nope, engine was not flushed - Just changed the oil from 20w50 to 10w40 and it starts leaking oil probably. Changing the turbo in a day or two, that should solve the problem.

When it was being put it, shaft play was close to zero and it was only after the oil change with this turbo.

???

Hey guys, I was using CT9 on stock internals and was using Liqui Moly 10w40 oil and everything was fine, never had no smoke or any issues. Recently I upgraded the turbo to GT28, initially used 20w50 and it was somewhat okay, some traces of smoke. Changed it to Liqui Moly 10w40 and now it...

Hi Keith, I'm looking for some help with the turbo upgrade I have on my 4efte. I'm running an ep91 with a Garrett GT28 turbo .42 a/r. Since, I'm in Islamabad, Pakistan - It's such a pain to find / source parts here. I actually need oil and water lines for the turbo. Will you be able to help...

If it's the exhaust turbine seal, wouldn't it be smoking all the time then or probably when boosting but it doesn't do that. :-/

Yeah, I'll get the turbo checked. It's a Garrett GT28 with .42 a/r and was bought used.

Same issue - No smoke otherwise, only when I rev it hard till about 6500 RPM while driving and I let go the accelerator, I see a cloud around 2200 RPM. No oil in the rocker cover breather - Turbo seems to be fine as well, as I said above - Other than that no smoke at all. What could be the...

Same issue - No smoke otherwise, only when I rev it hard till about 6500 RPM while driving and I let go the accelerator, I see a cloud around 2200 RPM. No oil in the rocker cover breather - Turbo seems to be fine as well, as I said above - Other than that no smoke at all. What could be the...

No oil at all from the rocker cover breather. Slight traces of oil in the turbo compressor housing but nothing in intercooler piping around the inlet. It worked absolutely fine with the stock setup (with ct9) - No smoke at all. It's currently running rich though at 0.5 bar with GT28 -...

I recently upgraded the turbo to GT28 (Stock internals) running at 0.5 bar. Everything else seems to be working fine, there's some black smoke too but that's because it's running rich at the moment. But I see blue smoke around 1800-2200 RPM, as the revs go higher, smoke disappears and when I...

Going for GT28 a/r 42 instead

So I found out that its compressor and exhaust housing are of CT12B - A3 and Turbines and Shaft are of a TD05 Hybrid. Like WTF? :-/