Search results

  1. G

    Engine breathing way way to much

    My rocker cover breather is blowing smoke way to much. The other day before I took it to the garage it was only a little bit. Little sprays of oil. It's now had a head skim and now it's smoking like a bitch out the top. I did 40miles opened the bonnet and the engine bay is dripping in oil. How...
  2. G

    Car takes 6 years to start!!!

    Hello I've taken my car to the garage and had the head skimmed and pressure tested. And now it's taking 6 years start. It winds and winds about 5 to 10 times before it starts. Before I took it to the garage. It's started 1st or second time. :( Why is it doing this? Thanks I've gOt new...
  3. G

    Rev up problem please help

    Hello I've taken my car to the garage and had the head skimmed and pressure tested. And then new gaskets and bolts. I've just gone to pick it up it's running sweet on tick over but when you put the throttle down it takes about 16 years to pick up. Is this a fuel problem, ignition, or like a...
  4. G

    Head bolt help

    I know that you have 5 long bolts 5 short bolts. This is because the head is skinny one side and thicker the other. So long onces go at the back short at the front. Please can someone confirm this as I might be wrong.
  5. G

    Cheaper coil over options (help)

    I want coil overs for my car but they are WAY to exspensive £700 I've found cheapest set. I was wondering as the micra or corolla are sort of same cars. Could you buy coil overs for a micra and fit them to the glanza. Are they the same set up etc. because new ones for micra are £300. Loads...
  6. G

    1 sets of rings for 1 piston

    Need new rings for piston number 1 thanks.
  7. G

    Possible miss fire or something wrong. Please help

    Hello I was out last night in my car when all of a sudden the car had a huge lack of power and started slowing down. I stopped and pulled over and found that my 4 turbo bolts was of and it wasn't connected to the manifold. It sounded like a tractor. So I fixed the blowing and bolted it back up...
  8. G

    Will burning oil from turbo damage car

    Hello I've noticed about 1 month ago that my car is blowing blue smoke only on tick over. And only some times on tick over. I know a seal will be gone on turbo. But as the weeks go on I've noticed more and more blue smoke as I guess turbo gets worse. And week by week the car is feeling that...
  9. G

    Alli Radiator

    It needs to be like half the size but twice as thick. I think there called like hdi radi
  10. G

    Wanted: GOOD CT9 Turbo!!!!!!!!!!!!

    Good turbo with no spoke and good blades etc....
  11. G

    Seat rails for cobra bucket seats for my glanza

    Hello I need some rails so I can fit my bucket seats in my car. The problem is I can't use standard rails as the standard seats are wider than the buckets ones. So I need rails for my seats but they need to be wider so they fit to bolt wholes. Or if there's anyway around this please help...
  12. G

    Fitting bucket seats help

    Hello I've got some cobra buckets and sparco 3 point belts. Now I've got rails but don't think there for glanza. Is there ways around this. Please help.
  13. G

    Wanted LSD

    Glanza 96
  14. G

    Need Glanza front bumper

    Standard. Or would preferr modded one. I've got a silver glanza but don't mind it having a respray. Thanks
  15. G

    Turbo oil seal gone!! Blue smoke

    Hello I believe my turbo oil seal has gone due to when on idle a bit of blue smoke appears from exhaust. Not all the time though. Only when I've driven it fast. I'm 100% sure it's not the piston rings. It is the turbo. Now on eBay there's like a seal kit for £50. Is that what I need to fix it...
  16. G

    Engine won't turn over. Help no ignition.

    Hello I've just done a engine rebuild due to big end had gone. And I had now put it all back together. It was time to wind over the engine for the first time. Now because the battery was flat I had a battery charger connected tO the battery on boost start. I then turned the key to start it and...
  17. G

    Please help. Where do I get a crank from. Thanks

    I need a new crank and dont know where I can find one. Thanks
  18. G

    Big End Gone Help!

    Hello my big end has gone in my glanza. Making loud noise. How easy is it to remove the crankshaft as I'm going to get it grinded and get new shells put on. Do I need to take the engine out. Can it be done with engine in. Etc. please help thanks.
  19. G

    Need Glanza LSD

    Where can I buy from guys.
  20. G

    Wheel spin help

    Hello I've got a td04 glanza 250bhp and everytime the turbo kicks in it starts to spin. Even in 3rd and 4th. I thought it could be tyres so I bought new ones and it still does it. Is there anything I can buy or do. Thanks.
Top