Search results

hi! can you send to me the manual? my email is mjmbanting@gmail.com the download site is blocked in my area. thanks!

thanks everyone for you consideration and patience...please bear with me! :) how do i check for spark and is it possible to check if the injector nozzles open?

i've put back everything including the earth from the photo above. i'm going to replace the o-rings, grommets and vibration insulator this weekend. how do i check for spark chris? thanks!

double checked EVERY connections and after a thorough inspection, i noticed that there's fuel sipping out from 2 injector plugs from the fuel rail. could this be the culprit why the engine won't start? i'm pretty sure i installed the injectors to the rails secruly...is it time to replace the...

will do...my apologies.

is this correct?

i think i found the cause. i may have switched the fuel lines. correct me if i'm wrong, the fuel line coming from the fuel filter should be connected to the fuel rail holding the injectors and the pipe right after the fuel pressure regulator should be connected to the charcoal canister...i could...

i think i returned all fuel pipes correctly...pipe from the fuel filter is connected to the pipe going to the fuel regulator, the pipe from the injectors is connected to the charcoal canister. is it possible that the fuel pump could not pump fuel to the engine? my fuel pump was just converted...

how do i do this? thanks for your quick responses guys! :)

what do you mean by king lead? sorry i'm not familiar...we may be using differenct terminologies here in the philippines. :)

oh sorry, i was referring to the fuel filter not the fuel pump. when i turn the key, there is electricity but it does't crank i only hear air.

i removed the fuel railing, injectors and fuel pump to have easy access removing the intake manifold. when i put everything back, the engine won't start? could the absence of fuel in the railing cause this, since it spilled when i removed it. what should i do? thanks guys!:)

how do i remove the power steering pump of our engine? i'd like to try removing the power steering pump to make the oil filter more accessible. thanks guys!:)

thanks for the link mate!

anyone?

do you have pictures and step by step procedures that could guide me through this? thanks guys!

has anyone tried removing the intake manifold of our engine? what are the steps and can this be done alone without special tools? i have to remove the manifold to drill a hole to remove a broken bolt. thanks guys!

Could you suggest ways i could put the seals tightly without damaging them? Thanks for the response.

hi guys! i've opened my rocker cover and replaced the cover gasket and spark plugs oil seals with new ones. what i like to know is if i have replaced the spark plug oil seals properly. i had a very hard time pushing the seals all the way to the top and applying brute force might damage the...

can the engine thermostat be checked if it's still working or needs to be replaced? if yes, how? thanks guys!:)