Rite guys ATM I'm trying to get some billet cams made up what numbers are u guys talking about and don't put ur name down if u might be after a set need numbers so I can make a order
i would be interested in these, pending specs, and a price, and what else will be needed, if its gunna end up 8 or 900 fitted tho, before a remap, then i wont bother.
oh, and are they being made by the same place as captain starlets?
i would be interested in these, pending specs, and a price, and what else will be needed, if its gunna end up 8 or 900 fitted tho, before a remap, then i wont bother.
oh, and are they being made by the same place as captain starlets?
if u stay below 9mm lift which will be ur 265 cams then stock shims buckets are fine!! anything bigger and your looking at shim underbuckets kits!!
with High lift Cams you gotta bear in mind where in the Rev range you wanna make power!!
so 272 Cams wud be for the serious contender i.e engine capable of Revving high and Turbo with larger Turbine A/R to produce power high up in the Rev Range
So for a GROUP Buy 265 Cams wud be ideal ;-) (Td04 , td05 , T3 , T25 country)
Best of luck
when i was looking at a set i spoke to newman cams, and they reckon they could produce 1 set for £1k (not especially terrible when cruise regrind cams are £1200)
they said the main reason for the high price is because of the oil way that runs right through the centre of the cam, the more sets bought the cheaper they become naturally.