JasonGlanza
Lifer
i have d2s coilies and passenger side tyre is rubbing with the mudgaurd inner dent and now the tyre is scratched on its side , this happened when i catched a bump or hole too hard. it is lowered a bit. but on the other side everything is fine only catches a bit the dust cover like with the passenger side too. i've noticed that camber when done was set differently each side. the driver side has more negative camber than the passenger side. It pulls to the passenger side a little bit too. (i noticed that are differently setted cause when you see the top mounts measurments its clear that one is more negative than the other)
is it normal on a Glanza that camber is set differently on each side? setup was done in a garage supposley profesionally.
can i adjust the left hand side coilie as the other as camber by myself?
also will aligment and steering are affected when camber is setup like i need it?
what precautions need to be taken when setting it up? seems not a hard job to do a slong as you have the measurments marked on the top mounts!
any help will be appreciated thnks
is it normal on a Glanza that camber is set differently on each side? setup was done in a garage supposley profesionally.
can i adjust the left hand side coilie as the other as camber by myself?
also will aligment and steering are affected when camber is setup like i need it?
what precautions need to be taken when setting it up? seems not a hard job to do a slong as you have the measurments marked on the top mounts!
any help will be appreciated thnks