as above, what they like to buy an engine off ??anyone have experience ?
E ep - karlb Member + Mar 7, 2011 #1 as above, what they like to buy an engine off ??anyone have experience ?
xxjack189 Member + Mar 7, 2011 #3 http://www.dtdirl.com/forums/showthread.php?t=21662&page=2 Id steer clear.
RS-Ronan Member + Mar 7, 2011 #4 heard some bad reviews about them. some hatchet motors have passed through their hands.
E ep - karlb Member + Mar 7, 2011 #10 4efte man . . believe rings are gone avta take head off this week and see exactly. .
E ep - karlb Member + Mar 7, 2011 #12 that would have been great man only for have asked neighbour to look at it already , thanks newayz dude . but if nothing sorted wil give you shout .
that would have been great man only for have asked neighbour to look at it already , thanks newayz dude . but if nothing sorted wil give you shout .
E ep - karlb Member + Mar 7, 2011 #14 starts ,smoke out of breather and oil , no compression ,didnt check what cylinder .but no power, no knocking or anything like that ??
starts ,smoke out of breather and oil , no compression ,didnt check what cylinder .but no power, no knocking or anything like that ??
Chris@CCM Member + Mar 7, 2011 #15 Cracked pistons u will have to take them out to see it I've rebuilt about 15 or so like that
E ep - karlb Member + Mar 7, 2011 #16 what you be looking at so to get done so man ??defo not rings ??would you recommend rebuilding my own engine or get another ??
what you be looking at so to get done so man ??defo not rings ??would you recommend rebuilding my own engine or get another ??
Chris@CCM Member + Mar 7, 2011 #17 I would buy a set of used pistons and rods new rings new head gasket and big ends and rebuild it
John@ECC Lifer Mar 7, 2011 #19 It would all depend if the bore's are marked or not, you may get away with std bore size.
Chris@CCM Member + Mar 7, 2011 #20 ep - karlb said: cheerz dude . .any maching need to be done ?? Click to expand... Not if ur cranks good and ur using stock pistons the bores in every one I've done have been fine if u broke one piston ur prob broke 3 no idea but they go most of the time in 3s lol
ep - karlb said: cheerz dude . .any maching need to be done ?? Click to expand... Not if ur cranks good and ur using stock pistons the bores in every one I've done have been fine if u broke one piston ur prob broke 3 no idea but they go most of the time in 3s lol