Glanza Weston
Member +
Hello, i need a bit help on getting my glanza alot faster than what it is, ive read loads of posts and forums but none of them are accuarate. ive seen that alot of people go for the TD04 turbos of the subaru and thats now what i want to do. I bought the car a month ago pretty much close to standard, its got a bailys bov and a apexi air filter, and bue samco pipes everywhere. now i know these are quick cars as standard but i want it to be even quicker thats why i want a tdo4. ive just installed a fround mount yesturday (jperformance) and found that its actually made it slower as the pipes are alot larger and intercooler is 4 times bigger than standard one, theres no enough puff kicking out the turbo for suck a big upgrade. so what ive done is gone and bought a boost controller today and turned up the boost from standard 9psi and put it at 12psi, it has made a huge differance, but this is still small amount of power, i want to get around the 260bhp mark.
here is a list of things im going to buy for it:
TD04 turbo
Walbro Fuel Pump
fuel pressure Reg
Manifold + Decat
Hks Adjustable actuator
Oil cooler
i think this is about it, ive already got a fcd as fuel cut is around 0.8 bar. if there is anything else i ned please can you help or give me some advise.
and the last think is, with my front mount the pipe that conects to the turbo will it be the same fitting as the td04, its ust that i know you need to rotate the turbo but was wondering if i need a different front mount, hopefully i dont as it cost quite a bit of dosh.
thanks....
here is a list of things im going to buy for it:
TD04 turbo
Walbro Fuel Pump
fuel pressure Reg
Manifold + Decat
Hks Adjustable actuator
Oil cooler
i think this is about it, ive already got a fcd as fuel cut is around 0.8 bar. if there is anything else i ned please can you help or give me some advise.
and the last think is, with my front mount the pipe that conects to the turbo will it be the same fitting as the td04, its ust that i know you need to rotate the turbo but was wondering if i need a different front mount, hopefully i dont as it cost quite a bit of dosh.
thanks....