Jam fcd muddle!?

[Danza V :D]

Hey all,

Got a jam fcd and want some answers from you fine people on wiring. Basically it was wired in but previous owner cut the wires but after a big of head scratching and some great help from another gt mate I've just met it turns out it has a live and it's earthed BUT the other wires wires coming from the fcd which I've been told go to the map sensor but which wire do I plumb it into?? Cause there's four... Help me

 

[GT-TD04]

http://www.toyotagtturbo.com/forums/showwiki.php?title=How+to+install+a+JAM+FCD+via+the+MAP+sensor

 

[Jay]

This should help buddy:

http://www.toyotagtturbo.com/forums/showthread.php?11807-How-to-fit-the-jam-FCD-via-map-sensor-*

Jay

EDIT - Getting slower on the draw it would seem lol..

 

[Danza V :D]

Haha, getting beaten to it now lol. That's the only thread I could find when I searched but I have a 96 v and that's for a ep85 mines got 4 wires not 3 so not sure which one ro cut.

 

[weeJohn]

Your map sensor has 4 wires?

 

[Danza V :D]

Was looking at wrong sensor lol!!

 

[Danza V :D]

Will I notice any difference in performance with it in other than after .8 bar??

 

[GT-TD04]

It just tricks the ecu into thinking you are boosting lower than you are thus removing fuel cut, so its highly advisable to get the fueling checked/set.

The only difference in power will be if you run more boost.