Dean-JDM-ep*1
Member +
ok i really need some help basically just rebuilt my engine standard spec etc after i cracked 3 pistons
new parts fitted are
head gasket
head bolts
new piston rings new oil oil and filter
now built it all back up started priming the engine but theres no oil getting around wat so ever?? now originaly i sealed the oil pump but took it back off and de sealed the oil pump so its just the o ring now. atm im turning it over with injectors un plugged. with no oil filter on and the oil return off the turbo off to see if oil is coming through but no joy what so ever ive been told it should just pickup but this isnt happening, please help someone this is really doin my head in as i needed the car back last weekend
engine ran fine before i took it apart
rep will be given
thanks Dean
new parts fitted are
head gasket
head bolts
new piston rings new oil oil and filter
now built it all back up started priming the engine but theres no oil getting around wat so ever?? now originaly i sealed the oil pump but took it back off and de sealed the oil pump so its just the o ring now. atm im turning it over with injectors un plugged. with no oil filter on and the oil return off the turbo off to see if oil is coming through but no joy what so ever ive been told it should just pickup but this isnt happening, please help someone this is really doin my head in as i needed the car back last weekend
engine ran fine before i took it apart
rep will be given
thanks Dean