Search results

Legends, thank you

Hi, I've got a 95 ep82 GT and I've taken my head out due to a cracked head gasket. Now, I've tested my head for warpage with a metal ruler and a feeler gauge, along the exhaust manifold side I can measure 0.4mm. Which is a lot apparently, and it'll need to be tested for hardness before they...

Thats exactly why its pissed me off lol.. it seems really easy but for some reason i just cant get it to work. I tried about 3 or 4 times today and its just no good. Ah well, il keep trying. Actually, u've raised a goos point, tomorrow i will drive with the cluster out to see if i can see the...

Hi, I have a 95 ep82. I took the speedo cluster out to replace one of the bulbs. Since then my speedo has stopped working. I've disconnected the cable from the gearbox end and pushed it in, I've had someone holding it in while I plug it into the cluster, I don't know what else to do. When I...

Hi guys, I have a 95 ep82 GT manual. Happened today.. I have no "reverse" it tries to move forward (it feels like 4th). It just doesn't feel like it engages anything. I can put it in reverse while moving forward with no repercussions or difference in driving.. All other gears are fine...

Yesterday my speedo and odo stopped working, and now i noticed today (...) that my MIL lights on, so according to this thread http://www.toyotagtturbo.com/forums/showthread.php?71074-EFI-self-diagnosis-system-*its fault 42. I haven't pulled the cable out yet, I did that when I replaced the...

Hi guys, lately when im driving at night I notice my lights dim when i brake, indicate, etc etc. I have taken it to an auto store and they tested it and battery came up low capacity, but starting and charging were OK. Ive been told to add an earth cable from chassis-engine. I know the battery...

Wow. It was the fuse. Cant believe it was that simple-was expecting more.. doh. Thanks guys

I just noticed now at night time, at low beams(when hi beams and rh low are real dim) my hi beam light on dash is on-but quite dim too. And when i switch them to hi beams the light goes off, and the left hi beam is sweet, and the right side low and his are off-not even dim anymore

I was going to check fuses but the bulbs still go.. just dim and dark orange. I remember a few weeks ago my lights would stay on and flicker dim for atleast 5 seconds aftr i switch them off. I just used bullet terminals. Ahh i just remembered that on the rh side, since it already had been...

Ok, so my rh side low beam plug wires had been knicked by a drive belt, so now i came to replace the plug.. after doing so its not quite right.. when i turn low beams on the lh side is fine, but the rh side is dim, even the high beams are dim on both sides (its not on high beam yet..). Then i...

That sounds awesome. It's strange how it will only fit genuine HB4's and not aftermarket though isn't it? But I'll give that a go. Thank u

Damit. I dont want genuine because i want whiter bulbs. I suppose i'll just have to make do with hb3s.. i'll try hb4s again tho. Thanks guys

Hi guys, I own a 95 ep82 starlet with the quad headlights and i've come to replace the bulbs.. Now, the bulbs I've taken out are HB3/9005 (bulbs have 2 male guides), which were a pain to get out. On one side, the plug has been replaced and obviously fits the HB3 perfect, but on the other side it...

Yeah well might have to do take it off this time.. we weren't bothered cause we could still do it without it, but it put us off because it looked like someone had seized the bolt, as it was halfway out lol. Ill post what I find hopefully next weekend if its nice weather. Fixed it, one of the...

Yeah the retaining clips are there. The slave cylinder does push the fork(makes a noise inside gearbox when clutch is pressed). No leaks that I can see, although my clutch fluid was changed about a yr and a half ago, and now its down to minimum. So, looks like im going to take the box off...

I was on the on ramp to the motorway and i was giving it a bit of jandal, still under 100km/h tho, and when i changed to fifth it wouldnt budge into it. Its the second time its been on the motorway (first time being 20mins beforehand) and 423kms since I changed the clutch. I could force it into...

Yeah part number tyk 6924, bought in new zealand. And unfortunately my starting problem is back (u may have seen my last thread in electric topic?). So im gonna buy some new leads and go from there..

Mm all was cleaned with brake parts cleaner before fitted, so there shouldn't be any grease on them. No toyota parts, it was an exedy kit

Yes I did