Search results

For sale: Celica GT-Four Item Condition: Very Good Price and price conditions: £3995 Extra Info: Body work is in very good condition due to being resprayed a few years ago and then stored. very low mileage and top of the range mods: Mileage - 61,000 Mods: Fensport hybrid turbo...

Don't suppose anyone would have one of these laying around? Thanks Christian

For sale: Forged TOM'S EP82 Item Condition: Good Condition Price and price conditions: £4995 Extra Info: If this doesn't sell I will sell all the parts in a separate thread. ENGINE Built by KAD Block Chemically Cleaned 0.5mm Overbore Cross Hatch Honed ROSS Pistons (Custom Dish) PAUTER...

Hi I'm sure I'll be too this has been covered but it can't search for 3 letter words on this forum like MAP so it's hard to find an answer. So What is the max boost I can run on the standard MAP sensor on a 1993 EP82? And Are there any plug and play 3 bar sensors I can run with a...

For sale: Tom's New Action Wheels Item Condition: Straight but could do with refurb Price and price conditions: £400 Extra Info: 4 nearly new Toyo PX4 Tyres on them. 195/50/15. Could either polish the lips to silver finish or get reanodized. Pictures...

For sale: Toyota MR2 Roadster 15" Alloys Item Condition: Used/Need a refurb Price and price conditions: £50 PRICE DROP Extra Info: Bought to use as track wheels but decided to stick with my Tom's wheels. Pictures: Contact Details: PM or text 07584075895 Location: Rochester, Kent...

Hi I've just changed my clocks as the fuel gauge stopped working. Bought the new set from a forum member and everything works but he had an MPH gauge that read upto 110mph where I have a kmh gauge that goes to 260. Now as my gauge is a trd kmh I swapped this across to the new cluster expecting...

Need the little sensors that sit low down on the B pillar to sense if the door is closed. Thanks Christian

Need the cradle the fuel pump sits in. My fuel level sensor isn't working but I have a racing pump already. Thanks Christian

Forged TOM'S EP82 ***NOW BREAKING*** For sale: Forged TOM'S EP82 Item Condition: Good Condition Price and price conditions: £7000 ono Extra Info: ENGINE Built by KAD Block Chemically Cleaned 0.5mm Overbore Cross Hatch Honed ROSS Pistons (Custom Dish) PAUTER Rods ARP...

Hey I'm in need of a head removal tool in kent first thing tomorrow morning. Anyone got one I could borrow or know where I could get one on a sunday morning? Thanks Christian

Any one know what size bolts these are? I need to order the three large bolts that fit onto the front of the gear box in a backwards L shape. Any help is welcomed. Thanks

***Rota's, VF39, CT9b, Oil Cooler, Sard Injectors and More*** For sale: Mocal Oil Cooler Kit SOLD Item Condition: Brand New Boxed Price and price conditions: £160 Extra Info: Power steering pump brace will need a tiny bit of shaving with a dremel to get the sandwich plate to fit flush...

Evening Does anyone know where i can get a good, strong set of nuts and bolts for my TD04 manifold and downpipe? Thanks

Hey i'm just after a CT20 to go on a Celica GT four. Any mileage or age as long as it's not not smoking. Thanks Christian

Does anyone know the return voltage from the MAP sensor to the ECU under: boost? on idle? and under negative vacuum? Thanks Christian

Hey just wondering what people thought could be causing this. I've just finished installing my engine after having it rebuilt. I thought i'd disconnect the coil pack and turn her over a few times to get oil round before firing it up. To make sure oil was being pushed round i left the...

Does anyone know at what pressure the vf34 becomes inefficient? Thanks Christian

Hi On a 4E with a ported head and 265 degree cams (9mm lift) running a compression ratio of 7.8:1 would the following turbo be any good? GT3076 intake side - A/R .70 M24 exhaust side - A/R 0.86 M3 1 - what would be the max boost this turbo could run? 2 - roughly where would i...

Ok i'm having my engine built at the mo and they had to take the valve stems out to regrind the spring seats so they sit lower. In doing this they had to break a few of the valve stem seals so i just need a set of valve stem seals asap. I'll pop down to Toyota tomorrow but was just wondering if...