Search results

quick question whats the differance between the gt limited and advance?? just a name change or was there more factory options with it was stardard??

right lads i wired this into my S14 today but havent put the wire to the handbrake yet as i dont know which one it is!! there is a brown and a purple wire!! one for the handbrake and the other for the speed pulse i think!! which colour is it for the handbrake?? cheers!!

just sold my glanza this morning!! got €8500!! miss her loads tho!!

normally when i pull up the lever to open the pertol door it doesnt work and today when it opened the spring catcher on the inside of it snapped off and i cant open it at all now!! i have a long drive in the morning and wanna know anyway of opening it!! must i force it open ya?? thanks!!

http://youtube.com/watch?v=UkM_aMuYsOM

fitted today!! and still not holding boost properly!! set a .8bar and when hits about 5k revs it starts to go to 1bar and hitting fuel cut!! help!! a.s.a.p. its wkd annoying!!

my actuator is starting to as the tool as somedays it will hold the boost correctly and other days it boosts 1bar on hi and upto .8 on low!! it was grand all last week but started to play up again all day today!! i have a HKS actuator ready to put in but i having a problem getting the efi intake...

looking at this picture now!! the pressure sensor is the fcd ya?? i can do the red and black wire and just want to make sure about the others so i cut the green wire on the ecu and wire the yellow and white wire onto it and thats it ya?? and what setting should i have it on??

my hks ssqv is dumping twice anytime i come onto boost!! it sounds so gay and i dont know what to do!! happen to any of you's??

im kinda confused!! my car has always been boosting .65bar and it was last night! i have hit fuel cut once or twice and then got a boost gauge and its reading .65.. now this morning the car wouldnt start!! it made the machine gun ticking so i put more water in the battery and jumped it and away...

i have a project for college and it has to be done on something mechanicaly!! was going to do it on the 4efte engine but cannot find enough facts on it!! any suggestions lads?? must be about 12 A4 pages long and most give a 10min presentation on it!! need idea a.s.a.p.

anyone have a link or have a good pic of a turbo?? need one for my college project, and want a good pic for the title page!! thanks lads!!

quick question!! i want to wire my boost gauge upto my spot lights but i have wired it to the headlights and when i turn them on the gauge goes off!! can someone tell me which wire it is for the fog lights ir what colour it is!! cheers lads!!

i have a problem with the boost gauge i got!! it a smoked one like defi and had to wire it up to the ignition did that i thought i had it right but when i turn the ignition on it comes on then when i turn over the car it just turns off??? dont know what to do!! been at it nearly a hour now!! any...

as above how much are they from toyota????

i fitted coilovers to my car last week and the front drivers side doesnt seem to line up properly!! the passenger side is flush with the arch but the drivers side is pushed in by about an half an inch to an inch??? any idea's guys???

http://cgi.ebay.com/ebaymotors/JDM-98-Starlet-EP91-Turbo-Glanza-Red-Clear-Taillights_W0QQcmdZViewItemQQcategoryZ33716QQihZ016QQitemZ260166800166QQrdZ1QQsspagenameZWD1V what you think of these!! i dont like them!! to chavvy i think!!

bad control!!! http://my.break.com/content/view.aspx?ContentID=327366

im doing a project in college on the 4e-fte engine!! anyone know any good sites with alot of info on them???