Search results

The missus has a gt turbo and i changed the actuator in it yesterday as the old one was seized.... she has a hks ssqv and shes complaining that at 3000rpm you can hear like the loud blow off of the dump valve that you would usually have on deacceloration but only if you hold the revs at 3000rpm...

well lads,my glanza is idling between 1500 and 2000 rpm up and down this only happened when i came on boost checked all the intercooler pipes and vac pipes,the car still boosts perfect:confused:

got a 99 glanza wiring harness and the lambda sencor isnt on it what wires are they to see if i could find it??:rolleyes:

was just wondering,i put a full wiring harness into my glanza but now my fog lights,brake lights and interior dash lights wont work what would be the main cause of this??.........bad earth maybe would that do it??:confused:

will a 98 glanza interior loom fit a 99 glanza or is there a difference in plugs

the girlfriend bought a gt turbo and she full it to the brim with juice all she got to a full tank was 300km,my glanza standard was giving me 500km her gt is standard was wondering why it could be so heavy on petrol?plugs, lambda on cat??

is there much to notching the block when fitting scat rods and what kinda tool would ya use??thanks

can anyone shed some light on this,the bottom hose in the gf car is staying cold and the top pipe has serious hot pressure on it when the temp is half way on the gauge,im after changing the thermostat and the car has never boiled over also the fan is staying on full time???

will scat rods fit with standard piston tops on a glanza????

hey guys, did an engine swap in the girlfriends blacktop trueno because her last engine got smokey but now once fitted the car is spluttery up as far as 4000rpm and backfires and pops out through the open stacks,i did change over the distributor and got the car timed,changed the map...

anyone using a trd headgasket on there starlet,can get one brand new for good money was wondering what they were like??

how much heat wrap would i need to wrap from decat back to exaust box??

just wondering whats the difference between a td04 and a td04L?

can you get camber arms for a glanza?? running 75mm wheel spacers on k-sport coilovers and need to tuck the wheels under the arches abit;)

my brother is making me an uprated inlet manifold he's nearly finished making it just cant find the flange that you use to bolt the inlet to the head anyone know where id get this flat bit of aluminium?

just wondering would an evo 5 uprated inlet manifold fit a glanza with a bit of work?heard they would but want to be sure as i was going to try it!

looking for the torque settings for big end bearings heard they where stage 1 20nm, stage 2 40nm but when i thightend them at that that didnt feel tight enough just wondering was that right?

hey lads, was just wondering would anyone know the head torque settings for a 1e 1litre carburator starlet??? thanks

black front bumper for glanza any year munster area

whats the biggest cams you can fit into a 5e??going buying a set and would like to know more about them before i purchace?