Alrite ppl I'm looking a blitz k24 or a kkk k24 turbo kit with manifold, downpipe, water and oil lines. If even you have a turbo and manifold givis a pm, cheers.
hello starlet fans ;)
my name is Sidney Beckers, i'm 21 y/o and own a toyota starlet ep71 1.3xl aut. 1989.
engine is still n/a, but will go boosted in the near future :)
things i already done:
Bodykit (hasselbeck), turbo bonet and grill.
some minor things, but that i will show in my project...
Hello starlet fans ;)
i'm looking for a starlet ep71 turbos s front grill (fog lights), top spoiler (preffered with brake light), mid spoiler, and rearlights.
does annyone have them?
thanks in forward!
gr sidney
Foto:
Hi People.
Recently I lost all my boost and the car was running at 0.5, after hours of work found it to be the HDi digi var boost, so got rid and installed a Manual Boost controller.
After this the car boosted fine to about 1.0 where I want it, BUT as the revs pick up I lose boost...
Hello all
I've gone and bought a Tuning Developments TD04 Ex gated kit, but it does not come with any pipework for the FMIC I have (expected). I have a WEPR FMIC which has the CT9 flange and bolts onto the turbo.
Would a TD04 hot pipe be bolted on also? as I've been looking at the photos...
hi all decided to join after weeks of lookin thru the site at all the serious glanza's and starlets and for the huge helpful amounts of information iv come across. its a great site
fellaz.. i've had my ct9b rebuilt and will be collecting & fitting it back in the car sometime before the weekend. any tips/ideas on how i should run it in..? i know there are various schools of thought when it comes to running in a rebuilt engine. how about a rebuilt turbo..?
i have a 1.3 glanza s non turbo and i got a 5e engine and im putting it in and im using the 1.3 ecu and loom and im using the 1.3 intake manifold and my mate is doing the timing so it will run on the 1.3 ecu and loom
what i want to know is what problums would i run into on my way ????
and im...
can anyone shed some light on the differences between the 3 units. have read around a little but not much intel coming forth. i already know that the ct9b was for the heavier-assed glanza so it has 9 blades/fins on the exhaust turbine instead of the 8 found on a ct9a. how about the hybrid..? any...
There are about a million threads on here about various people's cars chucking blue or white smoke out the exhaust so could I get bit of help with this thread so it can be made a Sticky?
For an approximate guide, as I understand it:
White = Water (commonly caused by Head Gasket or mixing up...
im trying to fix my tps senser my car keeps reving up and down and ter is no conetivaty with the pins but i dont no how to ajust them can anyone help ???????
i have been doing a conversion on my 92 starlet i put a glanza turbo engine in it with the gt interor loom and gt engine loom i also put a fuel pump in it two and i have eveything together and when i start the car it idels at 1,000 rpm and when i rev it it revs to 2,000 rpm then it dies and goes...
hello guys
i have a 96 black glanza and it has been going great, untill oneday i pulled in got petrol and when i took off again the car started to overheat! i realised that none on the fans mounted on the radiator where coming on! i switched the relays about and the fan powered on for 5 secs and...
i know this is likely to be a repost, so i need you help lads to find any old(er) links of the process members on here with clocked/rotated turbos used. i'm particularly after the stock ct9 clocked. i already know i will proli have to fabricate my actuator bracket afresh. thinking of clocking so...
hi i was going to do a project with a boxy starlet and i just wanted to know how the ecu's work and the engine loom coz i was planing to put a turbo gt engine in one ????
1992 MR2 Turbo (REV 2)
Item Condition: Used, see info below, runs fine etc
Price and price conditions:1300ono
Extra Info:
Completely honest sale:
1992 (J reg) Toyota MR2 Turbo (Rev 2)
87500 miles
I have had this car since July last year. Tax til July, MOT September
Before anyone asks, it...
G'day Glanzo's,
I am wondering what would be needed to convert a regular Glanza S '97 4E-FE engine into one with a turbo - as step by step as possible, or list.
Would like to swap with the 4E-FTE however that's just not realistic, as I can't find any wreckers with any available here in New...