Chris@CCM
Member +
ok lads theses ecus are made to order and to my spec , every ecu comes with a loom taged to show what wire gos were (very easy to wire in),tuning cable,cd with info and software, built in map sensor that reads up to 21psi of boost (can fit 38psi map sensor for £50),will come with a base map to get u started tuning or to drive to ur tuner,u can run a auto tps but its not needed.
16x16 fuel map
12x12 spark map
auto tune afr with a wide band if u have one
upgrades can be added at the time of ordering launch contrrol and flat shift , nos control , boost control (u need a vavle at 30 pounds cheap ebc or what),duel spark and fuel maps,shift light,knock sensor input,up to 4 coil drivers (no need for a ingniter will run wasted spark with 2 or coil on plug with 4) 400kpa map sensor (£50)
the price of these upgrade ranges for 5 to 20 pounds so there not dear up to 4 can be added to one ecu
price of the diy kit (wire in) is £520 posted with in the uk
the plug in kit is made to order as well price comes in at £620 posted if i can find some cheaper plugs the price will drop
if u want any more info feel free to pm me
im also going to put up a set by set guide on how to wire one in
no the ecu but looks the seam mine will have a ccm sticker and upgrades listed on the rear (il get pixs of the ecu loom tomorroe
16x16 fuel map
12x12 spark map
auto tune afr with a wide band if u have one
upgrades can be added at the time of ordering launch contrrol and flat shift , nos control , boost control (u need a vavle at 30 pounds cheap ebc or what),duel spark and fuel maps,shift light,knock sensor input,up to 4 coil drivers (no need for a ingniter will run wasted spark with 2 or coil on plug with 4) 400kpa map sensor (£50)
the price of these upgrade ranges for 5 to 20 pounds so there not dear up to 4 can be added to one ecu
price of the diy kit (wire in) is £520 posted with in the uk
the plug in kit is made to order as well price comes in at £620 posted if i can find some cheaper plugs the price will drop
if u want any more info feel free to pm me
im also going to put up a set by set guide on how to wire one in
no the ecu but looks the seam mine will have a ccm sticker and upgrades listed on the rear (il get pixs of the ecu loom tomorroe
Last edited: