I got Speedvision Cams for my 5EFHTE starlet and im not much satisfied with the results. ive lost low down power. on 2nd gear it takes times to hit boostr like as if ur going on 3rd gear.
It made 233hp @6900rpm on 1,4bar boost with octane 95.
The cam specs are as below-
Duration
Intake- 265Deg
Exhaust- 265Deg
Lift-
Intake- 8.7mm
Exhaust- 8.7mm
Has anybody else used these cams before? Any feedback and pros & cons of fitting high lift cams?
I got Speedvision Cams for my 5EFHTE starlet and im not much satisfied with the results. ive lost low down power. on 2nd gear it takes times to hit boostr like as if ur going on 3rd gear.
It made 233hp @6900rpm on 1,4bar boost with octane 95.
The cam specs are as below-
Duration
Intake- 265Deg
Exhaust- 265Deg
Lift-
Intake- 8.7mm
Exhaust- 8.7mm
Has anybody else used these cams before? Any feedback and pros & cons of fitting high lift cams?
i just fitted them in. i was previously using the 5EFHE cams. removed them and fitted this. a small portion at the front (near the pulley) had to be filed off to fit into the slot. thats just to fit in.
i even lost a drag race. humiliating thing is that i lost to the guy whom i beat the previous time with the stock 5EFHE cams. :/
The better for our car for me is to get 5efhe cams and a vernier puley ...