standard boost

[sep91m]

new to glanza and turbo cars....need to know what ep91s are boosting standard?have a few possibilities of boost leaking and connected a boost controller to see what it was boostin at and was .6 and nearly crept to .7 when really drove it on so can anyone tell me is it down on boost or is it ok.



thanks.

 

[whiteglanzav]

0.5 on low and 0.7 on hi so yours should be ok !

 

[sep91m]

thanks you just might have saved me a bit of un-nessecary work

 

[kellygt]

0.4 low boost 0.6 high boost standard

 

[corofin12345]

thanks you just might have saved me a bit of un-nessecary work

on low button 0.45 and on high 0.65.. you can bypass the high/low switch and it will give you a slight advantage.. think it will bring the full boost up to 0.70...

 

[Jay]

Three different answers and not one of them right. Come on lads, brighten up!

Standard figures on a standard engine:

Low boost is .40 of a bar.
High boost is .65 of a bar.

Once you modify the intake or exhaust sides this can rise depending on the car in question.

Regards,

Jay

 

[MARK@CMBAUTOS]

Three different answers and not one of them right. Come on lads, brighten up!

Standard figures on a standard engine:

Low boost is .40 of a bar.
High boost is .65 of a bar.

Once you modify the intake or exhaust sides this can rise depending on the car in question.

Regards,

Jay

spot on