The Official EMU Tuning & prob thread! Launch control success thanks to fur!

azerty

azerty

Supermoderator
here it is :p

GT-TPS.gif
 
azerty

azerty

Supermoderator
you're welcome ;) I can assure you it works. 2000 people who were present at Saturday event can vouch for this ;)
if it doesn't, then it would mean you have missed settings somewhere else... (launch control box or ignition setting)
 
Last edited:
Iain@CRD

Iain@CRD

Lifer
Can i just confirm this before i go editing these settings ...

My car was MAPPED using NORMAL not REVERSE. If i change this to REVERSE and input the settings you have put up ... will this affect my MAP?

Iain
 
azerty

azerty

Supermoderator
If your EMU isn't connected to any TPS wire (what should be the case as greddy didn't provide any diagram to do so) then it won't affect your map.
whatever you do, First backup your actual settings. then proceed ;)
 
Iain@CRD

Iain@CRD

Lifer
Well tried and tested it tonite and success for the EP82 finally!! It 100% works :D atleast thats one issue i dont need to worry about anymore, rep added buddy great work.

Iain
 
HYBRID

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
Well done! good to hear this one lads!

Another point of success for the tgtt.com EMU crew!

kon
 
S

starlet666

Member +
yes success and a very good job guys thanks a bunch......
sad day though...:( i forgot my kingchrome tool bag was behind my car....
ha ha ha u get where this is goin....

oh well i got launch control now so its allll good
 
I

Iceman

Member +
Hey starlet666

Can you give us a snap shot of ur IGN and Vehicle tab in the EMU software to see if there was any change that was made in there. Just curious b4 i go looking to try it 2nite when i get home. Will greatly appreciate it man. And glad we found a solution to this mystery lol. Can't wait to start spitting fire and leaving the line on some boost.
 
Sheldon

Sheldon

Malta Area Rep.
can someone confirm that a printer cable can work with the emu?

like this one

69.jpg


and when i install the software where do i get the serial for the software?? (i downloaded the software)
 
Last edited:
sx_turbo

sx_turbo

Lifer
Sheldon said:
cheers sx :) and you know bout the serial?
Click to expand...

serial is on emanage blue, the usb printer port is on emanage ultimate.


i beleive there is the possibilty of buy a usb to serial port connector, but these dont always work as the usb tends to be to fast for the serial port to cope with,
 
HYBRID

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
Sheldon said:
no mate you didnt get me hehe... i was saying about the serial number... as soon as you start installing the software it will ask you for a serial number.
Click to expand...

lol.. the serial no thing is just a waste of tab.. u can type anything.. it doesnt affect anything at all..:rolleyes:
 
I

Iceman

Member +
Helpppppppppppppppppppp

I just went to start my car and what i realise is that the emanage ultimate status light is blinking green and what it says in the manuel is that the fouled plugs feature is activated and no matter what i do i cant disable/turn off the feature so i can set the car started. Anyone ever got to turn this feature off. Please help cause i need to use the car 2morrow.

Thanks much in advance.
 
I

Iceman

Member +
yes i tried both last nite and this morning samething and i also removed and clean out the plugs, nothing. Is there a way to completely remove all settings and get the emanage like if it just left the factory?
 
S

starlet666

Member +
ok so i relised with the settings for launch in a ep82 shows the ecu it is at wot all the time......
mine is starting with fouled plugs feature activated as well but i havent had the issue ur talking about iceman....
mine starts fine and drives fine as well it would have to b something else bud
 
I

Iceman

Member +
anyone using the AEM uego wideband with their ultimate? Just one quick question, in the front panel settings option where you select a/f meter and other what are the values that you input there? I was reading the info that came with the wideband and they said 10.00 - 19.98 but what i realise is that the reading i am getting in the emanage datalogger is not in sync with the gauge. The gauge reads lower than the data logger. Anyone can help me out abit.
 
You must log in or register to reply here.
Top