Search results

so i have bought a mx5 mk1 bbr turbo and the starlet has to take its leave. so how much is it worth and what should i ask for it? Item for sale: 1994 toyota starlet gt turbo mk2 black quad light Item Condition: paint has been looked after (clayed 2 times, polished and waxed loads)...

so i have been told that 1 bar is goining to make me run in to trouble sooner or later and its my daily so i think id rarther have reliability. so how much have people run with the stock top mount and can i alter the air flow to help cool it any more (even with the bonet scoop)? thanks for the...

i have a seconhand mani, decat and will hoping to get 180 from 1bar, i realise i will need to overcome fuel cut, so do i get a aem fuel controller (fitted for 500 and maped) or get a fcd, what are the benifits from geting a fc against the greddy blue emange? and what other parts will i need, i...

so i have fitted the meisters and now everythings out, i have sorted the cambre out and caster, and i am just wondering what you guys had as your toeing. camber: -1.2deg caster: pulled all the way back (scientific i know ;)) toe: currently 4mm toe in accross 1 metre, im not sure what toe it...

Item for sale: 1994 starlet gt turbo black Item Condition: good but a few cips on the bonnet Price and price conditions: p/x mx5 bbr Extra Info: verry quick est 150bhp 0-60:6.5 standerd so proberbly 6.2 ish now paintwork is in good nick but there are a few chips on the...

with a mid rear spoiler you where going in to the uni carpark looked good :)

hi guys noticed that theres a slight slapping noise coming from the engine and me old man recons its the tappets so how do i change them and where do i get new ones from ? the sound is a realy quiet slap noise not a knock or bang but like some one with a pen tapping on your arm :) any advice...

so im thinking im going to get a hybrid as its cheeper and i dont want much more than 200 at the moment. so i know its still a ct9 but does a wepr ct9 mani and decat fit both hybrid and stock ct9's cos im thinking ill put the mani and decat on whilst collecting the parts to make it a 200bhp...

hi guys just read through the how to change suspension so im gunna do it next weekend but wanted to know if there where any cambre and caster settings i should know about before tightning it all up. also what toe shoud it have, its on 195/50/15 paradas any info will help :) thanks josh

just want to know a few things before i comit to buying anything and get some advice too :) whats in the TD04 setup? what supporting mods do i need? what boost will give me a good amout of power but not blow the car up? how much are the td04 kit and supporting mods ? thanks again guys...

so mine is ruined and now i have started to drive it its at the top of the priority list so does anyone have a decent used one with the correct fittings for a 4e? if you do than please PM me thanks Josh :)

hi guys i know i have seen this some where on the forum but had no idia where it is, i have tryed searching but nothing came back so any links will be awsome :) i think mines a bit thirsty lol also what size tank to the 82's have?

so my current air filter is mashed up and i dont like it cos it will kill me engine so knowing this when i went to jap fest 2 i got an hks filter and thought oh yea simple reducer will do it but its a realy stupid size so i was wondering if i have a duff filter or if any one else has had this...

so guys i am hopeing to get a decat from my gf for chrimbo and wanted to fit my zaust also soonish (in the next week ) but wanted to know is there was a garage around in southampton that people have used before with decats and big exhausts and passed , i know of one down in hamble that churchj...

ok guys thought id kill a few birds at once so here goes 1)how do i fit new dials 2)how do i fit a mph coverstion 3)what is a fcd and wat does it do(laymends tearms plz) 4)what is an actuator and wat does it do(laymends tearms plz) 5)what else will i need to run .8-1.0 bar i know that i...

as above

hi guys i was thinking about getting in to drifting and want to be able to drive it and insure it on the road. so i dont know that much about the kp60's but as far as i know it is a rwd set up so i would like to know any info you guys have on it and how much i would be looking at for one...

ok guys i got some meister r coils and am going to fit over the weekend so help will be required firstly i know FA about how to fit it so if there is a guide a link would be greatly appreciated secondly what camber caster and all that gubbins do i want if i have a set of 15's on it ? thirdly...

as above rly preferably indigo dials gauges required; boost oil temp oil pres contact on pm please oh and if any one has any pics of a home made pod for an 82 they would be greatly appreciated :) thanks josh

as above contact by pm plz